Console Table Questions Answered: Wood Choice, Customisation, Lead Time and Minimum Order
A practical console table FAQ for hotel buyers, designers and contractors. It covers wood choice, customisation, minimum order, lead time and worldwide delivery before you ask for a quotation.
This console table FAQ collects the questions we hear most often from hotel owners, designers and procurement managers before they request a quotation. The answers are practical and based on how made-to-order production works in our Istanbul factory. Where cost or timing depends on the project, we say so and explain the factors rather than quote figures that would not hold up.
How to use this Q&A
Every hospitality project is different, so treat the answers below as a planning framework. They will help you prepare a clearer brief, which in turn leads to a more accurate quotation. If a question is not covered, send it to us along with your drawings.
Wood choice questions
Which wood species are most common for hotel console tables?
Oak, walnut, ash and beech are the species buyers ask about most. Oak suits light, natural or smoked looks. Walnut gives a darker, richer tone and is often chosen for premium lobbies. Ash and beech are practical hardwoods with a lighter grain and are often used where budget matters.
Is solid wood always better than veneer?
No. Solid wood can be repaired and refinished more easily, but veneer over a stable core is often the better technical choice for wide tops and large flat panels because it is less prone to movement. Many hotel pieces combine both: solid wood legs and edges with a veneered top. The right answer depends on the size of the piece, the location and your maintenance plan.
Can I get the same colour in a different species?
You can get close, but not identical. Each species has its own grain, pores and natural undertone, so the same stain looks different on oak than on ash. For this reason we recommend approving a finish sample on the actual species you plan to use, and viewing it under the lighting of the final space.
Does the wood need to be dried for export?
Yes. Timber should be properly dried to a moisture level suited to the destination climate. Furniture that travels from one climate to a very different one can show movement, open joints or cracked finishes if the wood was not well prepared. Ask your manufacturer how moisture content is controlled in production.
Customisation questions
What can be customised on a console table?
Almost every visible and structural feature can be adapted to the project. Common options include:
- Overall length, depth and height
- Wood species, veneer cut and finish colour
- Top material: wood, stone or glass on a wooden base
- Leg style, including tapered, turned, sled or panel bases
- Drawers, shelves, doors and cable cut-outs
- Edge profile and top thickness
- Metal details such as brass trims or black steel inserts
- Logos, plates or room-specific details
Can you make a console from a photo or sketch?
Yes, we can work from reference photos, hand sketches, CAD files or PDFs. A photo shows the look, but it does not show dimensions, joinery or hardware, so our team will prepare shop drawings for your approval. Estimates made from a photo alone are indicative until those details are confirmed.
What information helps me get an accurate quote?
The more complete your brief, the closer the quotation will be to the final price. Please include:
- Dimensions, or the available wall or niche space
- Quantity per design and per room type
- Preferred wood species and finish, with a reference if possible
- Special features such as drawers, lighting or charging points
- Destination country and preferred shipping terms
- Target delivery window linked to your construction programme
Do you provide drawings before production?
Yes. Production starts from project drawings that you review and approve. These normally show elevations, sections and key joinery details, so everyone agrees on dimensions, materials and finish before any timber is cut.
Minimum order questions
What is the minimum order for a console table?
Minimum order quantities depend on the design, the materials and how much special setup the piece requires. A simple variation of an existing model usually needs less setup than a fully new design with custom parts. Tell us how many pieces you need and we will confirm what is practical for your project, including smaller runs for boutique hotels or single-feature areas.
Does a larger quantity change the unit cost?
Often it does, because setup, programming and finishing preparation are spread across more pieces. The effect varies by design, so we do not apply a fixed rule. If your quantity is still uncertain, ask us for a quotation with two or three quantity options so you can compare them.
Can I order several sizes of one design?
Yes. A single design can often be produced in different lengths for different areas of the hotel, such as a longer piece for the lobby and a slimmer one for corridors or guest rooms. This keeps the visual language consistent across the property while respecting the space available in each location.
Lead time questions
How long does production take?
Lead time depends on the quantity, the complexity of the design, the materials and how quickly samples and drawings are approved. We do not give a single number because it would be misleading. After reviewing your drawings, we will propose a schedule linked to your opening date.
What slows a project down most often?
Delays usually come from approvals rather than from production. Late finish decisions, repeated design changes after sampling, and unclear dimensions are the most common causes. Special materials, such as particular stone tops or imported hardware, can also extend the schedule.
Should I order a sample first?
For any significant quantity, yes. A sample lets you check proportion, finish colour, edge details and build quality in person. It is far less costly to adjust a sample than to correct a full batch, and it gives your team something concrete to approve.
Delivery and export questions
Do you ship worldwide?
We produce to order and ship to hotel projects in many regions, including Europe, the Middle East, Central Asia and Africa, as well as other destinations on request. Routes, transit times and documents differ by country, so we plan these with you once the destination is known.
Which shipping terms are available?
We can discuss common Incoterms such as EXW, FOB, CIF and DAP, depending on your preference and the project. Your choice affects who arranges freight and who carries the risk at each stage, so it is worth agreeing early.
How are the pieces protected in transit?
Wooden surfaces, legs and any stone or glass tops need careful packing. We use protective wrapping and suitable crating, and we can label packages by item or room number for easier handling on site. If you need pre-shipment photos, tell us when you place the order.
Do you offer installation?
On-site installation can be discussed for projects where it makes sense. Many console tables are simple to place, but wall-mounted and built-in pieces benefit from correct fixing, so please tell us early if you want support in this area.
Before you request a quotation
A few minutes of preparation saves time later. Gather your drawings or room schedule, decide on a preferred wood and finish direction, and note your target delivery date and destination. Even an incomplete brief is a good starting point, and we will tell you what is missing.
Next step
If you are planning a hotel, restaurant or residential project and need custom console tables, send us your drawings, sketches or reference photos. We will review them and come back with material suggestions, a realistic schedule and shipping options for your destination.
Sıkça Sorulan Sorular
What is the best wood for a hotel console table?
There is no single answer. Oak suits natural and light looks, walnut gives a richer tone for premium areas, and ash or beech offer practical, budget-conscious options. The right choice depends on location, finish, traffic level and maintenance plan. We can compare species for your project.
Is there a minimum order for custom console tables?
Minimum quantities depend on the design, materials and setup involved. A variation of an existing model is usually easier to produce in small runs than a completely new design. Tell us your quantity and we will confirm what is practical.
Can you produce a console table from a photo?
Yes. We can work from photos, sketches, CAD files or PDFs. Because a photo does not show dimensions or joinery, we prepare shop drawings for your approval, and any estimate before that stage remains indicative.
How long does it take to make console tables?
Lead time depends on quantity, design complexity, materials and approval speed, so we do not quote a fixed period. After reviewing your drawings, we propose a schedule aligned with your project programme and opening date.
Do you export console tables worldwide?
Yes, we produce to order and ship to hotel projects in many regions. Shipping terms such as EXW, FOB, CIF or DAP can be discussed, and we plan packing, documents and delivery sequence with you.
Should I request a sample before ordering?
For larger quantities we recommend it. A sample lets you check proportions, finish colour, edges and build quality before production, when changes are far easier and less costly to make.
Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.





