Wooden Console Table Model Names and Terms: A Glossary for International Buyers
Console table terminology varies between designers, factories and countries, and small misunderstandings can lead to the wrong sample. This glossary explains the terms you are most likely to meet in cross-border briefs.
Console table terminology is rarely identical from one country, designer or factory to the next. A word like "apron" or "sideboard" can mean different things in a London design studio, a Dubai contractor's schedule and a production workshop. This glossary explains the terms you are most likely to meet when briefing a manufacturer, so your drawings, emails and samples all describe the same piece.
We build custom hospitality furniture to project drawings and ship worldwide, so we see how small wording differences can turn into rework. Use this page as a shared reference for your team and your supplier.
Why a console table glossary helps cross-border briefs
Most misunderstandings do not come from poor design; they come from words. A designer may write "slim console", a buyer may read it as 30 cm (11.8 in) deep, and the factory may quote 40 cm (15.7 in). Agreeing on terms early avoids this kind of gap.
A common vocabulary also makes quotations easier to compare, because each supplier prices the same construction rather than its own interpretation. Where a term below has more than one meaning, we note it and suggest a clearer way to write it in your brief.
Basic piece and type names
Console table
A narrow table designed to stand against a wall, usually in an entrance, corridor or lobby. It is mainly for display, light use or a small surface, not for dining or long work sessions.
Hall table or entryway table
Largely the same as a console. "Hall table" is more common in British English, while "entryway table" is more common in American English. Treat them as synonyms unless your designer says otherwise.
Sofa table
A console-style table placed behind a sofa. It is often a little taller and longer than an entrance console. If you use this term in a hotel brief, state the intended location and height.
Sideboard, buffet and credenza
These are storage furniture with doors or drawers, normally lower and deeper than a console. They are separate product types. If your piece has closed storage but a console-like profile, describe it as "console with doors" and add dimensions.
Demilune console
The demilune console definition is simple: a half-moon shaped table with a straight back edge and a curved front. The straight side sits against the wall. Check the depth at the widest point, because that figure decides how far the piece protrudes into the walkway.
Bullnose, round and oval consoles
A bullnose console has rounded front corners, while a full round or oval piece is rarely placed against a wall. Always state which edges are curved so the factory does not assume the wrong geometry.
Structural terms
Top
The upper surface. It may be solid wood, veneered board, stone or glass. When you write "top", add the material and thickness, for example 30 mm (1.2 in).
Apron
The apron console meaning is the horizontal frame piece directly under the top, connecting the legs and adding rigidity. A console with an apron looks like a small table frame. A console without one may rely on a thicker top or a panel base. In a brief, say whether you want a visible apron and what its height should be.
Stretcher
A horizontal bar between the legs, lower than the apron. It adds strength and sometimes serves as a foot rest or shelf support. Some designers avoid stretchers for a lighter look, which places more demand on the leg joints.
Leg, post and panel base
Legs can be tapered, turned, square or sled-shaped. A panel base uses solid sides instead of separate legs. These choices change both appearance and shipping volume.
Plinth
A recessed base that sits under a cabinet or console, hiding the floor contact. It is common on heavier storage pieces.
Overhang and setback
The overhang is the distance the top extends past the base. The setback is how far the legs sit in from the top edge. Both affect proportion and how top-heavy the piece looks.
Material and surface terms
Solid wood
Timber cut from the log and used as a single piece or glued strips. It can be sanded and refinished, but it reacts to humidity.
Veneer
A thin layer of real wood bonded to a stable substrate such as MDF or plywood. It gives a consistent look and good stability. Ask which veneer cut and matching method is intended.
Engineered wood, MDF and plywood
Board materials used for cores, panels and curved parts. They are not poor quality by definition; their performance depends on grade, bonding and finishing.
HPL and laminate
High-pressure laminate is a durable, printed or coloured surface layer. It is occasionally used on tops or interiors where wear resistance matters.
Lacquer, oil and stain
- Lacquer: a protective film coating that can be matte, satin or gloss.
- Oil: a penetrating finish that enhances the natural feel and is easier to spot-repair.
- Stain: a colouring agent applied before a protective coat; it does not protect on its own.
Sheen or gloss level
Describes how reflective a finish is. Avoid vague words such as "semi" without a reference sample, because factories and designers read them differently.
Detail and construction terms
Edge profile
The shape of the top edge: square, bevelled, rounded or waterfall. Specify it with a section drawing when it matters.
Edge banding
A thin strip applied to board edges to cover the core. Quality and thickness vary, so confirm material and colour matching.
Joinery
The method of connecting parts, such as mortise and tenon, dowels or hidden fixings. These affect strength and the potential for wobble in daily use.
Fluted and reeded
Both describe vertical grooves or ridges on a surface. "Fluted" usually refers to concave grooves, while "reeded" refers to convex ones, though many designers use them interchangeably. Include a detail sketch with groove width and spacing.
Inlay and marquetry
Decorative work where contrasting materials are set into a surface. It is more labour-intensive than plain veneer.
Floating or wall-mounted
A console fixed directly to the wall without floor-reaching legs. This requires information on wall type and load assumptions.
Trade and project terms
FF&E and loose furniture
FF&E means furniture, fixtures and equipment. A freestanding console is usually loose furniture, while built-in joinery is fixed.
Case goods
Hotel-industry term for storage and casework pieces such as wardrobes, drawers and cabinets. Consoles with drawers sometimes fall into this category in a furniture schedule.
Shop drawings
Detailed manufacturing drawings prepared by the factory from your design intent. You approve them before production.
Mock-up or prototype
A first full-size piece made to check proportion, finish and construction. A sample may be only a finish panel or small part, so clarify which one you mean.
Knock-down (KD) and fully assembled
KD pieces are shipped in parts and assembled on site, saving volume. Fully assembled pieces save site labour but take more space in a container.
Lead time
The period between order confirmation and readiness for shipment or delivery. It depends on materials, finishes, approvals and factory capacity, so we confirm it per project.
Incoterms: EXW, FOB, CIF, DAP
Standard shipping terms that state who handles transport, risk and cost at each stage. Name the intended term in your enquiry so the quotation matches your logistics plan.
Terms that often cause confusion
| Term | Possible misunderstanding | Clearer way to write it |
|---|---|---|
| Slim console | Depth interpreted differently | State depth in cm (in) |
| Natural finish | Raw wood or clear coating | Name the finish type and attach a sample reference |
| Solid top | Solid wood or thick board | State material and thickness |
| Sample | Finish panel or full piece | Say "finish sample" or "full-size prototype" |
| Matte | Different sheen levels | Provide a physical reference |
How to use these terms in your brief
A clear brief usually includes the piece type, overall dimensions, top material and thickness, base construction, finish and sheen, quantity and delivery term. Add a photo reference and a simple sketch if you have them. If a term is uncertain, describe what you see instead of naming it.
Both sides then work from the same picture, and the first drawing is more likely to match your intention.
Conclusion
Console table terminology is not complicated, but it is not universal either. Using precise words for dimensions, materials, construction and logistics saves revisions and keeps quotations comparable. If you are planning a hotel, restaurant or residential project, send us your drawings, photos or a simple description, and we will review the brief and come back with questions, construction suggestions and a quotation.
Sıkça Sorulan Sorular
What is the difference between a console table and a sideboard?
A console table is narrow and mainly used for display or a light surface, often without storage. A sideboard is deeper and lower, with doors or drawers for storage. A console with drawers falls between the two, so give dimensions and describe the storage in your brief.
What does apron mean on a console table?
The apron is the horizontal frame section directly beneath the table top, connecting the legs and adding rigidity. It can be visible and decorative or hidden. When ordering, state its height and whether you want drawers or cable access integrated into it.
What is a demilune console table?
A demilune console is a half-moon shaped table with a straight back that sits against the wall and a curved front. Its maximum depth is at the centre, so check that figure against your corridor or lobby clearances before approving the design.
Is a sample the same as a prototype?
Not always. A sample can be a finish panel or small component, while a prototype or mock-up is a full-size piece. Clarify which one you need, because scope, cost and timing differ between the two.
Which shipping terms should I mention in a console table enquiry?
Name the Incoterm you plan to use, such as EXW, FOB, CIF or DAP, and the destination country or port. This lets the factory quote the correct scope for packing, loading and transport, and makes offers easier to compare.
Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.





