Consoles and Dressers

Console Table vs Sideboard vs Credenza: Which Piece Fits Which Hospitality Space?

The terms console table, sideboard and credenza are often mixed up in briefs and quotations. This guide defines each piece and maps it to the hotel zones where it works best.

If you are weighing a console table vs sideboard for a hotel project, the short answer is this: a console table is a slim, mostly open piece that stands against a wall for display and light use; a sideboard is a deeper, closed storage unit with doors and drawers; and a credenza is, in practice, a low sideboard, often with a more refined, office or lounge character. The names overlap in everyday speech, which is exactly why they cause confusion in specifications and quotations.

This guide clarifies the terminology, compares the three types by dimensions and function, and matches each one to a hospitality zone. We also explain how to write a brief so that a factory prices and builds the piece you actually have in mind.

Console table definition: what it is and what it is not

A console table is a narrow table designed to stand against a wall, typically in an entrance, corridor or behind a sofa. Its main purpose is to carry objects such as a lamp, a tray or flowers, and to give the space a focal point. Storage is minimal or absent: at most a shallow drawer or a lower shelf.

Typical depths are around 25 to 45 cm (10 to 18 in), and heights usually sit close to 75 to 85 cm (29.5 to 33.5 in). These are common ranges rather than fixed rules, and a project can move outside them. Because the depth is small, the piece takes little floor space and suits circulation areas.

Sideboard: storage first, surface second

A sideboard is a storage cabinet. It is usually 40 to 55 cm (16 to 21.5 in) deep, with doors, drawers or both, and a top surface that doubles as a serving or display area. Its proportions are wider and heavier than a console, and it often rests on a plinth or short legs.

In hospitality, a sideboard works when something needs to be stored out of sight: tableware, linen, menus, spare glassware or in-room amenities. It is a working piece as much as a decorative one, so hardware, interior finish and shelf adjustability matter.

Credenza vs console: how the two differ

The question of credenza vs console comes up often because both can look slim and low. The real difference is function. A credenza is a closed storage unit, usually with sliding or hinged doors, and often sits lower than a console. A console is primarily a surface.

Credenza is also a regional and stylistic term. Some designers use it for a mid-century or office-style unit, others treat it as a synonym for sideboard. When you write a brief, avoid relying on the word alone and add dimensions, door type and interior layout.

Side-by-side comparison

FeatureConsole tableSideboardCredenza
Main purposeDisplay and light surface useClosed storage plus serving topLow closed storage, often with sliding doors
Typical depth25-45 cm (10-18 in)40-55 cm (16-21.5 in)40-50 cm (16-20 in)
Typical height75-85 cm (29.5-33.5 in)75-95 cm (29.5-37.5 in)Often lower, around 60-80 cm (23.5-31.5 in)
StorageNone or a shallow drawerDoors and drawersDoors, sometimes drawers
Visual weightLight, openSolid, heavyLow and horizontal
Best zoneEntrances, corridors, lobbiesRestaurants, suites, breakfast roomsLounges, executive areas, suites

The dimensions above are indicative ranges seen in the market. Your own project drawings, the room geometry and the operator's brand standards should set the final sizes.

Mapping each piece to a hotel zone

Entrance, lobby and reception areas

Console tables are the natural choice here. They stay slim, do not block movement and give a place for a lamp, flowers or a branded object. If you need a larger lobby piece, consider proportion and placement carefully, because a console that is too small looks lost against a tall wall.

Corridors and elevator lobbies

Depth is the limiting factor. A sideboard is usually too deep for a corridor, and fire or accessibility rules may restrict anything that protrudes. A narrow console, or a wall-mounted floating version, is the safer option. Check local regulations with your consultant early in the design.

Restaurants, breakfast rooms and bars

A sideboard is the working choice. Staff need somewhere to keep cutlery, napkins, trays and spare plates close to the tables. A console can serve as a host stand or a display for wine and desserts, but it will not replace a service cabinet.

Guest rooms and suites

In compact rooms, a slim console can sit in an entry niche or under a wall-mounted TV. In larger suites, a credenza or low sideboard can hold the minibar, spare blankets or a TV, while keeping the lines of the room clean. Match the choice to the room size and the amount of hidden storage the guest actually needs.

Lounges, meeting rooms and executive floors

A credenza suits these spaces well. Its low, horizontal profile works under artwork or a screen and conceals coffee equipment, files or AV cables. Because it is closed, it keeps the room tidy during events.

Construction differences that affect your quotation

The three pieces are built differently, and that affects cost and lead time. A console is simpler: a top, a frame and legs or a panel base. A sideboard or credenza includes carcasses, doors, hinges or runners, interior shelves and sometimes drawers, so it involves more components and more finishing time.

  • Hardware: soft-close hinges, runners and locks add cost but improve durability in daily hotel use.
  • Materials: solid wood, veneer on engineered boards, stone or glass tops can be combined on any of the three types.
  • Finishes: doors and drawer fronts show wear faster than a console top, so finish selection deserves attention.
  • Assembly and shipping: storage units are heavier and bulkier, which affects crating and freight volume.

How to avoid terminology mistakes in a brief

Many quotation delays begin with a vague name. When you send a request, describe the piece rather than relying on the label alone.

  1. State the function: display only, or storage as well.
  2. Give overall width, depth and height in metric units, with imperial if your team uses it.
  3. Specify the front: open, doors, drawers or sliding panels.
  4. Note the base type: legs, plinth or wall-mounted.
  5. Add a reference photo and the finish you expect.

With this information a factory can produce shop drawings that match your intent, and you can approve them before production starts.

Practical selection guide

  • Choose a console table when the space is narrow and the piece should be visual rather than functional.
  • Choose a sideboard for hotel restaurants and suites when staff or guests need hidden storage near the point of use.
  • Choose a credenza when you want low, closed storage with a clean horizontal line, particularly in lounges and executive areas.

Mixed schemes are common. A hotel may use consoles in the lobby, sideboards in the restaurant and credenzas in suites, all with a shared wood species and finish so the property feels coherent.

Ordering from Palmiye

Palmiye produces custom hospitality furniture to project drawings in our own factory in Istanbul, and we supply hotel projects worldwide. Whether you need a slim lobby console or a restaurant sideboard, we can work from your drawings, a sketch or a reference photo, prepare shop drawings, make a sample and arrange export packing and shipping. Timing and cost depend on quantity, materials, finish and approvals, so we confirm them after reviewing the project.

Next step

If you are specifying furniture for a hotel, restaurant or resort, send us your drawings or a short brief with dimensions, quantity and finish. We will review it and come back with suggestions on the right piece type, material options and a project quotation.

Sıkça Sorulan Sorular

Is a console table the same as a sideboard?

No. A console table is a slim, mostly open surface for display, usually 25 to 45 cm deep. A sideboard is a deeper cabinet with doors and drawers for storage. The two can look similar from a distance, so always specify depth and front type in your brief.

What is the difference between a credenza and a console?

A credenza is a low, closed storage unit, often with sliding or hinged doors. A console is primarily a surface with little or no storage. The word credenza is also used loosely as a synonym for sideboard, so dimensions and layout should accompany the name.

Which piece suits a hotel corridor?

A narrow console table or a wall-mounted floating console is usually the better fit, because corridors have limited width and may be subject to fire and accessibility rules. A sideboard is normally too deep. Confirm clearances with your consultant before finalising sizes.

Where should a hotel use a sideboard?

Sideboards work best in restaurants, breakfast rooms and larger suites, where staff or guests need closed storage close by. They hold tableware, linen, menus or amenities out of sight while giving a useful top surface for service.

Can Palmiye make all three pieces to custom sizes?

Yes. We produce consoles, sideboards and credenzas to project drawings in our Istanbul factory and ship worldwide. Send drawings, a sketch or a reference photo, and we will advise on materials, finishes, sampling, lead time and export packing.

Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.

Related products

All Console Table Models

Get a quote for Console Table Models

Share dimensions and quantities; we will prepare a quote for your project.