Consoles and Dressers

How Much Does a Custom Wooden Console Table Cost? Factors Behind the Price

There is no single figure for a custom console table, because the price depends on a handful of specification choices. This guide explains each cost driver so you can brief a factory accurately and compare quotations fairly.

The custom console table price you receive will depend on the timber, the top material, the construction, the finish, the quantity and the delivery terms. Two pieces that look similar in a render can differ widely in cost once these factors are defined. We do not quote fixed prices in articles like this, because every project is different, but we can show you where the money goes and which choices you can adjust.

Palmiye manufactures to project drawings in our own factory in Istanbul and ships worldwide, so the points below reflect how a made-to-order quotation is actually built up.

Why console tables are priced differently from other hotel furniture

A console table is a small piece, but it is not a simple one. It is usually seen at close range in lobbies, corridors and suites, so finish quality and detailing are scrutinised more than on a wardrobe or a headboard. Material use is low, while labour, finishing and quality control make up a larger share of the unit cost than many buyers expect.

This is why a hotel furniture unit price for a console can feel high compared with the volume of wood in it. You are paying mostly for precision, not for mass.

The main cost drivers at a glance

Cost driverWhat changes the priceLevel of impact
Timber or substrateSpecies, grade, solid vs veneered constructionHigh
Top materialWood, stone, glass, metal or laminateHigh
Shape and joineryCurves, fluting, carving, visible jointsHigh
FinishOil, lacquer, number of coats, colour matchingMedium to high
Hardware and featuresDrawers, doors, lighting, cable cut-outsMedium
QuantityBatch size, repeated sizes, setup timeMedium
Packing and freightCrating, volume, Incoterms, destinationMedium to high

Timber, veneer and board choices

The wood species is the first factor most buyers think of. Hardwoods such as oak, walnut, ash and beech have different availability, yield and working characteristics, and these show up in the quotation. Rare or heavily figured timber also needs more selection, because not every board is suitable for a visible surface.

Construction type matters just as much. A veneered panel on a stable core and a fully solid timber build are priced differently, and each has its own strengths in hotel use. For a deeper comparison, see our article on solid wood versus veneer.

  • Solid timber usually needs more selection, drying control and waste allowance.
  • Veneer on engineered board can give a consistent look across a large batch.
  • Grade matters: a clear, selected face costs more than a rustic one with natural marks.

The top: often the biggest single variable

On many console tables the top is the most expensive component. A wooden top is priced by thickness, edge profile and grain selection. A stone or glass top adds a separate supplier, fabrication and extra packing protection.

Thickness changes both appearance and cost, because thicker tops use more material and need more careful stabilisation. Edge profiles such as bevelled, rounded or waterfall details add machining time. If budget is tight, a simpler edge or a slimmer top is often an easier saving than changing the species.

Shape, joinery and decorative detail

A straight rectangular console with tapered legs is the most economical form to build. Curved, demilune, fluted or carved designs need more machining, more hand work and more allowance for rejected parts. Decorative techniques such as inlay or marquetry add further labour.

Joinery also affects price. Concealed fixings, mortise and tenon connections and reinforced leg-to-top joints take more time than basic assembly, but they directly influence how the piece performs after years of use in a hotel.

Features that add cost

  • Drawers with soft-close runners and concealed locks.
  • Doors, hidden compartments or adjustable shelves.
  • Integrated lighting, charging points or cable management.
  • Branded details such as engraved plates or room-specific markings.

Finish and colour matching

Finishing is a labour-intensive stage and a frequent source of price differences. A natural oil is generally quicker to apply than a multi-coat lacquer, but the right choice depends on the location, traffic and the look you want. Colour development, such as matching a RAL code or a stain sample, adds sampling time.

Gloss level, number of coats and protective topcoats all influence the result and the cost. Ask for the finish system to be written into the quotation so you can compare like with like.

Quantity, repeat sizes and setup

Every production run includes setup: preparing templates, programming machines and mixing finishes. Spread across a larger batch, this cost per piece falls. For small runs the same setup is shared by fewer pieces, so the unit price may be higher.

Standardising sizes helps. If you can use one design in two or three dimensions rather than ten different ones, production becomes more efficient. Changing a dimension slightly can also change how boards are cut, so ask your manufacturer which adjustments are neutral and which are not.

Samples, drawings and engineering

For custom work, costs before mass production are real. A sample or prototype, shop drawings and finish approvals all take time and materials. Some manufacturers include these in the unit price, others show them separately, so check how your quotation treats them.

These steps are worth the investment. A sample approved before production reduces the chance of costly corrections on a full batch.

Packing, freight and delivery terms

Export packing is part of the real cost of a console table. Wooden surfaces, legs and stone tops need protection, and the type of crating affects both safety and shipping volume. Whether you choose a knock-down or assembled piece also changes freight.

Your Incoterm shapes what is included. An EXW price excludes transport, FOB includes loading at the port of departure, and CIF or DAP include more of the journey. When comparing quotations from different suppliers, always check that they use the same terms. Destination matters too, as routes and costs differ between Europe, the Middle East, Central Asia and Africa.

Why quotations stay valid only for a period

Timber, hardware and freight costs can change over time, so quotations normally carry a validity period. If your project timeline is long, ask how price is handled between approval and production, and agree on this in writing.

How to keep the price under control without losing quality

  • Define the use: a lobby feature piece and a corridor piece do not need the same specification.
  • Simplify the shape before downgrading the material.
  • Reduce the number of sizes and finishes across the project.
  • Choose veneer or a stable engineered core where solid timber adds little value.
  • Agree on the finish system and sample approval process early.
  • Compare quotations on the same Incoterm, packing and scope.

What to include in your request for a quotation

A precise brief leads to a more accurate price. Provide dimensions, quantity, reference images or drawings, preferred timber and finish, top material, destination country and the shipping terms you want. If some details are open, say so, and your manufacturer can offer options at different specification levels.

Next step

If you are planning a console table order, send us your drawings, reference photos or a simple brief. We will review the specification, point out where cost can be adjusted and prepare a project quotation with lead time and shipping options for your destination.

Sıkça Sorulan Sorular

Why do custom console tables cost more than catalogue pieces?

Custom pieces need their own drawings, samples, setup and finish development, and these costs are spread over fewer units. You also control timber, size and details, which affects material use and labour. A catalogue item shares these costs across larger standard runs.

Which part of a console table affects the price most?

Usually the top and the construction. Stone, thick solid wood or complex edge profiles raise cost, as do curved, fluted or carved elements. Finish and joinery quality follow closely. Species matters, but shape and top choice often change the price more.

Does ordering more pieces reduce the unit price?

Often yes, because setup, templates and finish preparation are shared across more pieces. The effect depends on the design and materials. Standardising sizes and finishes across the project usually gives a clearer saving than the quantity alone.

Are samples included in the quoted price?

It varies between manufacturers. Some include a sample in the project price, others charge separately or credit it against the order. Ask for this to be stated clearly in the quotation so you can compare offers correctly.

How can I compare quotations from different suppliers fairly?

Compare the same timber, construction, finish system, packing method and Incoterm. Check whether samples, drawings and crating are included, and confirm the validity period. Differences in scope often explain price gaps more than quality does.

Can you supply custom console tables to any country?

We produce to order in Istanbul and export worldwide. Shipping method, packing and delivery terms are planned for each destination and agreed in the quotation. Tell us the delivery country when you send your brief.

Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.

Related products

All Console Table Models

Get a quote for Console Table Models

Share dimensions and quantities; we will prepare a quote for your project.