Consoles and Dressers

How Much Does a Custom Hotel TV Unit Cost? Price Factors from Size to Finish

There is no single price for a custom hotel TV unit, because cost follows size, cut-outs, hardware, bracket details and finish. This guide shows how each factor moves the quotation and how to specify the unit so prices are comparable.

The custom TV unit price for a hotel project depends on a handful of specific decisions rather than on the unit's general appearance. Two units that look similar in a render can differ widely in cost once cut-outs, hardware, wall brackets and finish are defined. This guide explains each driver so you can specify clearly and read a TV unit quotation with confidence.

We do not quote fixed figures here, because the cost of a hotel TV unit depends on the drawing, the quantity and the destination. What we can do is show you where the money goes.

Why TV units are priced differently from other case goods

A TV unit is a small piece of furniture that carries a lot of technical detail. It holds a screen, often a set-top box, power and data connections, and sometimes a minibar or luggage shelf. Much of the labour sits in machining and fitting, not in the board itself.

That is why a TV console with a modest footprint can cost more than a larger, plainer wardrobe panel. When you compare quotes, compare the technical content, not just the dimensions.

The main TV console pricing factors

FactorWhat it changesEffect on cost
Overall sizeBoard area, edging length, packing volumeSteady, roughly proportional increase
Core and surface materialBoard grade, laminate, veneer or lacquerOften the largest single driver
Cut-outs and cable routingMachining time, reinforcement, trimsModerate, multiplied by quantity
HardwareHinges, runners, latches, bracketsModerate to high on busy units
Bracket and wall fixingSteel parts, backing plates, installation timeModerate
Finish and colour matchingProcess steps, samples, rejectsLow to high depending on finish
Packing and shippingCartons, pallets, container spaceDepends on Incoterm and route

Size, depth and proportions

Width and height set the board area, and depth affects the edge banding, internal structure and the volume the unit occupies in a container. A unit sized for a 55 inch screen is usually not much cheaper than one for a 65 inch screen, but a long console with a shelf and drawers certainly is.

Standardising dimensions across room types is one of the simplest ways to hold cost steady. If you can use one width for most rooms and a second for suites, production becomes more efficient and your unit price benefits.

Cut-outs, cable routing and access panels

This is where TV units differ most from other furniture. Each opening has a purpose, and each one adds machining and finishing work.

  • Cable pass-throughs: a round or rectangular opening in the back panel is quick; a lined and edged opening with a grommet or trim takes longer.
  • Power and HDMI recesses: sockets built into the unit need accurate cut-outs, space behind them and sometimes a separate access panel.
  • Ventilation slots: any cabinet that houses a set-top box needs air movement, and slots or perforated panels add machining.
  • Service access: removable panels let technicians reach cabling without dismantling the unit, but they add parts and hardware.

On a small order these details hardly register. Across a few hundred rooms they become a visible part of the total, so confirm the exact list before you request prices.

Hardware: hinges, runners and latches

Hotel use is hard on moving parts. A drawer in a TV unit is opened daily by guests and by housekeeping, so commercial-grade runners and hinges are worth specifying even though they cost more than basic fittings.

Soft-close mechanisms, push latches and locks for minibar compartments all add to the hardware line. Ask the factory to list the hardware type for each moving part, so you can compare like with like when reviewing quotations.

Wall brackets and fixing method

The way the screen and the unit are attached to the wall has a direct cost effect. A fixed bracket is simpler than a swivel arm, and a floating unit needs a stronger hanging system than a floor-standing console.

  • Fixed or tilting bracket: lowest hardware cost and a clean look.
  • Swivel arm: more parts, more load on the wall and more installation care.
  • Concealed hanging rails or steel backing: necessary for wall-hung units, and the cost depends on the weight and the wall type.

Decide whether the bracket is supplied by the furniture factory, the AV contractor or the hotel. Without that clarity, the item is either missing from the quotation or priced twice.

Material and finish

Material choice usually moves the price more than any other single item. HPL or melamine on a quality board is the practical option for budget and midscale hotels. Wood veneer, lacquer and stone-effect details raise the cost, and so do special colours that need matching to a sample.

For high-use areas, think about wear points such as the top edge, the base and the front of any shelf. A better finish where hands and luggage touch the unit often pays back more than a premium finish on the whole piece.

Quantity, sampling and tooling

Setting up a design has a fixed cost: drawings, programming of machines, jigs and a sample. On a large order that cost is spread across many units, and on a small one it is not. This is why the unit price for 20 pieces and 200 pieces of the same design can differ.

A sample or mock-up unit is a sensible early investment. Approving finish, proportions and cut-out positions on one piece prevents expensive corrections later.

Packing, shipping and installation

Transport adds to the delivered cost, and the effect depends on the Incoterm. An EXW or FOB quotation covers the goods up to a certain point, while CIF or DAP includes more of the journey. Make sure you compare quotations on the same basis.

Packing method matters too. Corner protection, cartons and pallets protect the finish, and efficient loading reduces freight cost per piece. If you need on-site installation, state it in the request, as it is a separate scope from supply.

How to make quotations comparable

When you ask several suppliers for a TV unit quotation, give each one the same information. Otherwise differences in price may only reflect differences in assumptions.

  1. Send a drawing or sketch with overall dimensions and screen size.
  2. List all cut-outs, sockets and ventilation requirements.
  3. State the board type, surface material and finish reference.
  4. Specify hardware: runners, hinges, locks and brackets.
  5. Give the quantity, the delivery location and the preferred Incoterm.
  6. Say whether a sample and installation are required.

Where you can control cost without losing quality

  • Reduce the number of unit variants across room types.
  • Keep cut-outs functional and avoid decorative openings that serve no purpose.
  • Use premium finishes only on visible, touched surfaces.
  • Agree the bracket and wiring responsibility before production.
  • Approve a sample so that revisions do not appear during mass production.

Next step

If you are planning a hotel or hospitality project, send us your drawings, screen sizes and quantities. We will review the details, point out where cost can be managed and prepare a project quotation for custom TV units made in our Istanbul factory and shipped worldwide.

Sıkça Sorulan Sorular

What affects the custom TV unit price the most?

Material and finish usually have the largest effect, followed by size, quantity and the amount of machining involved. Cut-outs, hardware choices and wall fixing add further cost. The exact balance depends on your drawing, so a detailed specification gives the most reliable quotation.

Is a hotel TV unit cheaper if I order in bulk?

Usually the unit cost falls as quantity rises, because setup, drawings and tooling are spread across more pieces. Material purchasing and production planning also become more efficient. The size of the saving depends on the design and the finish, so ask for prices at several quantities.

Do cut-outs and cable holes change the price?

Yes. Each opening needs machining, edging or trims, and some need reinforcement or access panels. One opening adds little, but across hundreds of units the total becomes noticeable. List all required cut-outs in your request so they are priced correctly.

Are wall brackets included in the TV unit quotation?

It depends on the agreed scope. Some projects have the factory supply brackets and backing plates, while others leave them to the AV contractor. State this clearly in your request so the item is neither missing nor priced twice.

What information should I send to get an accurate quotation?

Send drawings or sketches with dimensions, screen size, materials, finish references, hardware needs, quantity and delivery location. Mention the Incoterm you prefer and whether you need a sample or installation. The more complete the brief, the more accurate the quotation.

Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.

Related products

All Console Table Models

Get a quote for Console Table Models

Share dimensions and quantities; we will prepare a quote for your project.