Custom Size Adjustments on Standard Vitrine Models: What a Factory Can Change Without Redesign
You can often customise a standard vitrine size by changing width, height and glass layout within the limits of the original construction. This guide explains what is usually simple, what needs engineering and what means a new model.
Yes, you can usually customise standard vitrine size, as long as the changes stay inside the construction logic of the original model. Most factories can adjust width, height and shelf positions on an existing design without starting from zero. Changes that alter how the cabinet is built, such as depth, door type or glass thickness, are a different matter. This guide sets out where the practical limits sit, so you can brief a factory realistically and avoid surprises in the quotation.
What "semi-custom" really means
A semi-custom display cabinet starts from a proven model: its joints, hardware, glass fixings and finish are already tested in production. The factory then changes selected dimensions or layouts and issues a revised drawing. You keep the look of the standard model but fit it to your space, your product range or your order programme.
A full custom order, by contrast, starts from your concept and requires new construction details, new hardware choices and usually a new sample. Semi-custom work is quicker to draw and easier to price. It is also easier to repeat across batches, which matters for wholesale and project orders shipped worldwide.
Width adjustments
Width is the easiest dimension to change. Panels for tops, bottoms and shelves are cut to length, and the glass doors are cut to match. The limits come from three things:
- Board span: wider shelves and tops sag over time, so very long spans may need thicker boards or a central divider.
- Door width: a hinged glass door that becomes too wide is heavy and puts stress on hinges. The factory may suggest splitting it into two doors.
- Board and glass sizes: sheet sizes affect waste and cost, so some widths are more economical than others.
As a general rule, modest changes of a few centimetres either way are routine. Large changes, such as doubling the width, are better treated as a new configuration and checked by the factory's engineers.
Height adjustments
Height changes are usually possible, but they affect more parts than width does. A taller cabinet needs longer side panels, taller glass and often a different shelf layout. It also changes stability, so wall anchoring or a wider base may be needed.
Consider the following when you ask for a taller or shorter version:
- Glass height: tall single panes are heavier and harder to pack and handle. Splitting the door into an upper and lower glass section is a common solution.
- Shelf spacing: keep the spacing sensible for what you will display, rather than just stretching the existing gaps.
- Lighting: LED strips and drivers may need to be re-specified for a different cabinet height.
- Transport: very tall units may not fit through delivery routes or standard packing sizes, so check access before you finalise.
Glass layout changes
Glass layout is where many buyers see the most value in a semi-custom approach. You may want a full-height glass door instead of a half-glass one, glass on the side panels, or fewer or more shelves. These changes are often possible, but each has consequences:
- Glass shelves: thickness and span limit how much weight each shelf can carry. A longer shelf may need thicker glass or a support.
- Side glass: adding glass to the sides changes how the frame is joined and may need a revised structure.
- Door glazing: changing from a single pane to divided panes alters the frame profile and can change the look noticeably.
- Safety: for public areas, the glass type may need to be tempered or laminated, which can affect what is practical.
Ask the factory to confirm glass thickness and shelf load in writing whenever you change the layout.
Changes that are usually simple, moderate or a redesign
| Change | Typical effort | Note |
|---|---|---|
| Width within a modest range | Simple | Check shelf span and door width |
| Height within a modest range | Simple to moderate | Check stability, glass size and lighting |
| Shelf number and spacing | Simple | Confirm load per shelf |
| Finish or colour change | Simple to moderate | Sample approval recommended |
| Depth change | Moderate | Affects hardware, door swing and stability |
| Door type change | Redesign | New hardware and frame details |
| New glass thickness or structure | Redesign | Needs engineering review |
Why depth and door type are different
Depth looks like another simple dimension, but it affects how the cabinet balances, how far doors swing and how shelves are supported. A deeper cabinet may need stronger back panel fixing, while a shallower one may no longer fit the original hinges or lighting. Treat depth as a design change and ask for a drawing before approving.
Door type works the same way. Moving from hinged to sliding doors, for instance, changes the frame, the tracks and the glass fixing. Our other guides cover door types in detail, but the key point here is that this is no longer a small adjustment.
How changes affect price and lead time
Semi-custom changes are generally quicker to engineer than a new model, but they are not free. Cost and timing depend on the size of the order, the materials, the amount of drawing work and whether a new sample is needed. We do not quote a fixed number for these changes, because they vary by project.
In practice, ordering several pieces with the same adjusted dimensions is more efficient than ordering many different sizes. If you are buying in bulk, limiting the number of size variants keeps production simple and costs easier to control.
How to brief a factory on size changes
A clear brief shortens the whole process. Include the following:
- The model name or reference photo of the standard vitrine.
- The target width, height and depth in millimetres.
- What you will display and roughly how much it weighs.
- Quantity per size, and whether sizes repeat across locations.
- Any requirements for glass type, locks, lighting or finish.
- The destination country and any fire or safety rules that apply.
With this information, the factory can reply with a revised drawing and a clear note on anything that cannot be changed safely.
Approve the drawing before production
Always approve the revised drawing before cutting starts. Check the overall dimensions, shelf positions, glass layout and any hardware changes. For larger orders, a sample of the adjusted size is worth considering, because it shows how the proportions look in reality.
Once the sample or drawing is approved, keep it on record. This helps if you reorder later and need the same dimensions and look across batches.
Conclusion
You can customise a standard vitrine size with confidence when changes are limited to width, height, shelf layout and glass arrangement. Depth, door type and glass structure usually need engineering review and may amount to a redesign. If you have a standard model in mind and a set of target dimensions, send us the details or your drawings and we will tell you what can be adjusted and how it would affect your quotation.
Sıkça Sorulan Sorular
Can a factory change the width of a standard vitrine?
Usually yes. Width is one of the easiest dimensions to adjust because panels and glass are cut to size. The limits are shelf span, door width and board sag, so very wide versions may need dividers, thicker shelves or split doors. Your factory should confirm this on a revised drawing.
Is changing the height of a vitrine difficult?
Moderate changes are generally straightforward, but height affects glass size, shelf spacing, lighting and stability. Taller cabinets may need wall anchoring or split glass doors. Delivery access and packing should also be checked before you confirm the final height.
What counts as a redesign rather than a size adjustment?
Changing door type, glass thickness or the way the structure is built usually means a redesign. Large depth changes may also fall into this group. These alter hardware, frames and stability, so they normally need new drawings and often a new sample before production.
Do size changes increase the price?
They can, depending on the amount of drawing work, materials, order quantity and whether a sample is needed. The effect is project-specific, so a fixed figure cannot be given here. Fewer size variants in a bulk order generally keep production simpler and easier to price.
What should I send to request a semi-custom vitrine?
Send the model name or a reference photo, target dimensions in millimetres, quantities per size, what will be displayed and any glass, lock, lighting or finish needs. Add the destination country so safety and shipping requirements can be considered from the start.
Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.





