Furniture Import Frequently Asked Questions: Answers on Samples, Currency, Containers and Support
A scannable furniture import FAQ for first-time buyers, with short practical answers on samples, currency, containers, documents and support when ordering custom TV units and vitrines from Turkey.
This furniture import FAQ collects the questions we hear most often from first-time importers, distributors and project buyers. Each answer is short on purpose, so you can scan the page, find your topic and decide what to prepare before contacting a factory. We build custom and bulk furniture in Istanbul for buyers worldwide, and the examples below focus on TV units and vitrines, though most points apply to other case goods too.
Where a figure depends on your project, we say so instead of guessing. Timing, cost and packing always change with size, finish, quantity and destination.
Getting started: before you contact a factory
What should I prepare for a first enquiry?
The more clearly you describe the product, the faster you receive a usable quotation. A good first message includes:
- Drawings, sketches or reference photos of the piece
- Approximate dimensions in metric units (cm or mm)
- Quantity per model and whether you expect repeat orders
- Preferred materials and finishes, or a colour reference such as RAL or a physical sample
- Destination country and port, plus your preferred Incoterm
If you only have photos, that is fine. A factory can work from references and propose dimensions for your approval.
Can I order a design that is not in a catalogue?
Yes. Custom work is our normal way of operating. We produce to your drawings or develop shop drawings from your concept, so size, door type, glass, lighting and finish can be adapted to your market. Standard models can also be adjusted in size without a full redesign, which is often the cheapest route for resellers.
Do you sell only to large companies?
No. Buyers range from new importers placing a first mixed order to hotel groups and developers ordering by the hundred. What matters is that the order is clearly specified. Minimum quantities depend on the model, materials and how much special tooling or setup is needed, so ask for the figure for your specific piece.
Samples and approvals
Do I need a sample before a bulk order?
For a new design, a new finish or a first order with a new supplier, a sample is strongly recommended. It lets you check proportions, hardware, glass edges, colour and build quality before production of the full quantity begins. For a simple repeat of a model you already know, many buyers skip it and approve drawings and finish chips instead.
What is the difference between a sample and a mock-up?
A sample is usually a single finished piece. A mock-up can also show the piece in context, for example a TV unit with its screen, cabling and wall fixing, or a vitrine with lighting installed. For hospitality projects, a mock-up helps owners, designers and operators approve details together.
How do I approve colour and texture remotely?
Physical finish samples are the most reliable, because screens and printers distort colour. Ask for small finish boards in the exact wood, veneer or lacquer you will receive, and keep one signed reference at your end. Colour names such as oak, walnut or grey vary between countries, so always attach a code or a physical piece.
What should I check in sample photos and videos?
- Gaps between doors and frames, and how evenly they run
- Edge banding and panel joints
- Glass edges, hinge fixing and shelf supports
- Interior finish, not only the visible front
- Drawer or door movement, shown on video
Pricing, currency and payment
Which currency will my quotation use?
International quotations are commonly issued in a major currency such as USD or EUR, though this is agreed per order. State your preference when you enquire. Check the quotation date and how long the price stays valid, because material and exchange conditions can change over time.
What affects the unit price most?
Several factors combine, and none is fixed in advance:
- Dimensions and the amount of board, veneer or solid wood used
- Finish type, such as melamine, veneer, or lacquer
- Glass type, thickness and lighting
- Hardware quality, locks and soft-close systems
- Order quantity and number of different models
- Packing method and shipping terms
How do I compare two quotations fairly?
Compare them line by line. Check the core material, board thickness, hardware brand or grade, finish system, glass specification and packing method. A lower price often reflects a lighter specification rather than a more efficient supplier. Ask each factory to quote against the same written specification.
What payment methods are used?
Bank transfer is the most common method for export orders, usually split between a deposit at order confirmation and a balance before shipment. Other options such as a letter of credit may be possible for larger orders. Agree the schedule in writing before production starts.
Production and lead time
How long does production take?
It depends on the quantity, materials, finish and approval speed, so we do not quote a single number for every project. Time is usually counted from confirmed drawings, approved samples and deposit, not from the first enquiry. Slow approvals are the most common cause of delay on the buyer side.
Can a rush order be shortened?
Sometimes the schedule can be tightened, for example by choosing stocked materials or simplifying a finish. Steps such as lacquer curing, glass supply for special sizes and careful packing cannot be rushed without risking quality. Tell us your deadline at the start so we can plan realistically.
Will a reorder match the first batch?
Keep the approved sample, finish chips and technical drawings as references. Natural veneer varies from batch to batch, so small differences in grain and tone are normal. For sets that must match, order together or ask the factory to hold approved reference pieces.
Containers, packing and shipping
How many pieces fit in a container?
There is no universal answer. It depends on the carton size of each model, whether pieces are flat-packed or assembled, and the mix of products. We calculate the loading plan from your exact list, in a 20 ft or 40 ft container, or as a partial load for smaller orders.
Can I mix TV units and vitrines in one container?
Yes, mixed loading is common and often cost-effective for new importers. Heavy cartons are placed low and glass items are protected and separated. Give us the full list early so the loading plan can be made before packing begins.
How is glass packed for export?
Glass is usually packed separately from the cabinet body, with edge protection, foam or corrugated layers, and strong outer cartons or crates marked as fragile. Flat-pack shipping reduces breakage risk and saves volume, while assembled cabinets save time at destination. The right format depends on your route and your assembly capacity.
Which Incoterm should I choose?
EXW places most responsibility on you from the factory door, FOB covers loading at the Turkish port, CIF includes freight and insurance to your port, and DAP delivers to a named place. First-time importers often prefer terms where the supplier manages more of the journey. Your freight forwarder or customs broker can confirm what suits your country.
What documents will I receive?
Typically a commercial invoice and a packing list, with other documents such as a certificate of origin or material test reports available on request. Requirements differ by country, so check with your customs broker before the order is confirmed.
Delivery, installation and support
What should I check when the container arrives?
Photograph the container seals and cartons before unloading, count the packages against the packing list and note any visible damage on the delivery paperwork. Open fragile cartons soon after arrival rather than weeks later. Prompt, documented reports make any claim far easier to resolve.
What if a piece arrives damaged or faulty?
Send clear photos and the carton label right away. Depending on the cause, the remedy may be a spare part, a replacement glass panel or a repair. For larger orders we recommend ordering a small set of spare panels, hardware and finish touch-up material with the main shipment.
Do you provide installation?
On-site installation can be arranged for projects where it is needed, particularly in hospitality. For importers and resellers, we supply assembly instructions and clear technical drawings so your own team can install the furniture. Ask about this when requesting a quotation.
A short checklist before you order
- Confirm drawings, dimensions and quantities in writing.
- Approve a sample and finish chips.
- Agree currency, deposit, balance and Incoterm.
- Review the loading plan and packing method.
- Confirm the documents your customs broker needs.
- Plan spare parts and receiving checks.
Next step
If you are planning a first import or a larger programme, send us your drawings, photos or a simple list of models and quantities. We will review them and reply with material suggestions, packing options and an estimated schedule for your project.
Sıkça Sorulan Sorular
What is the minimum order for custom furniture from Turkey?
It varies by model, materials and finish. A simple adjustment of a standard design can often be produced in smaller runs, while fully custom pieces with special tooling may need higher quantities. Send your drawings and target quantity, and we will confirm what is practical.
Do I need a sample before placing a bulk furniture order?
For new designs, new finishes or a first order with a new supplier, a sample is strongly advised. It lets you check proportions, hardware, glass and colour before full production. For repeats of a known model, drawings and finish chips may be enough.
Which currency is used for international furniture quotations?
Export quotations are commonly issued in USD or EUR, but the currency is agreed per order. Tell us your preference when enquiring, and check the quotation's validity period, since material costs and exchange rates can change.
Can TV units and vitrines be shipped in the same container?
Yes. Mixed containers are common. We prepare a loading plan from your list, placing heavier cartons low and protecting glass separately. Sharing the full product list early helps us plan packing and avoid wasted space.
What support is available after delivery?
We can supply assembly instructions, technical drawings and spare parts such as glass panels or hardware. If something arrives damaged, send photos and carton labels promptly so we can arrange a repair, spare part or replacement.
Which Incoterm is best for a first-time importer?
It depends on your experience and local logistics. FOB suits buyers with a forwarder, while CIF or DAP shifts more of the journey to the supplier. Discuss options with your customs broker and agree the term before the order is confirmed.
Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.





