Wholesale Display Cabinets for Boutiques and Jewellery Stores: Custom Wooden and Glass Fixtures
A practical guide for shopfitters and retail chains ordering several matching display counters and showcases, covering glass, lighting, security, finishes and export logistics.
If you are sourcing jewellery display cabinet wholesale volumes for a new store roll-out, the decisions that matter most are not the style of the cabinet but the details: glass type, lighting, locks, tolerances and how every unit will be packed and installed. A shopfitter who fixes these points before production gets matching counters across all locations and fewer surprises on site.
This guide is written for shopfitters, retail chains and designers who need several identical or related pieces made to drawings. Palmiye produces custom wooden and glass fixtures in our own factory in Istanbul and ships worldwide, so the notes below reflect what we ask for when a project starts.
Why jewellery and boutique fixtures are specified differently
A jewellery counter is a small piece of furniture that carries a high-value stock load, a lighting system, a lock system and a customer-facing glass surface. Each of these has to work together, and a weakness in one shows up immediately to the customer.
Boutique display cabinets for clothing, accessories or fragrance are less demanding on security but equally demanding on appearance. Because customers see the fixtures at close range, finish quality, edge details and glass clarity carry more weight than they would in a back-of-house cabinet.
Typical fixture types in a retail programme
Most store concepts combine a small family of pieces rather than one cabinet. Defining the family early helps a factory propose shared components and keep the programme coherent.
- Counter showcases: a glass-top or glass-front unit where staff serve from behind, usually with a storage base.
- Wall vitrines: tall, shallow cabinets for display along the perimeter, often with mirror or fabric backs.
- Freestanding island cases: glazed on all sides, used in the middle of the shop floor.
- Tower or column cases: narrow vertical units for single feature products.
- Cash-desk and packing counters: solid joinery that matches the display fixtures.
Choosing the glass
The retail glass showcase is judged by its glass. Clear tempered glass is common for doors and shelves because it is stronger than annealed glass and breaks into small pieces. Laminated glass holds together if cracked and is often preferred for counter tops and for higher-security applications.
Low-iron (extra-clear) glass removes the slight green tint visible at the edges and is often chosen where the colour of gold, gemstones or textiles must look true. It costs more, so many buyers use it on the front panels only. For a deeper comparison, see our article on glass types for vitrines.
Edges, corners and thickness
Polished edges look better and are safer to handle than raw edges. Specify the edge finish and corner treatment on the drawing, as well as glass thickness for each panel. Thickness should follow the span and the load on the shelf or top, not only appearance.
Lighting that flatters the stock
Lighting is where jewellery cabinets differ most from general display furniture. LED strips or spot modules are normally integrated into the top, the shelf edges or the frame.
- Colour temperature: warmer light flatters gold, while cooler light suits diamonds and silver. Many retailers choose one temperature for the entire chain so that stores look alike.
- Colour rendering: a high CRI value helps stones and metals look natural. Ask your supplier for the specification of the LED modules they plan to use.
- Drivers: place power supplies where they can be reached for replacement, ideally in the base and not behind fixed glass.
- Heat: LEDs in sealed cabinets need a heat path. Aluminium channels and small ventilation openings protect both the lights and the stock.
For wiring, define where the cable leaves the cabinet and what plug standard the destination country uses. These small points are easy to miss and slow down the opening day.
Security details for counters and wall cabinets
Security is a matter of layers, not a single lock. The right level depends on stock value, store location and your insurer's requirements, which you should check with your own advisers.
- Locks: cam locks, key-operated sliding-door locks or higher-grade systems. For a chain, a master-key arrangement lets managers open every unit while staff keys stay limited.
- Glass: laminated glass on the customer side and fixings that cannot be removed from outside.
- Hinges and tracks: concealed hinges and recessed tracks reduce the points of attack.
- Internal access: a lockable storage base behind the counter for stock and packaging.
We can build to the lock type you specify, but we do not make claims about insurance or theft resistance. Treat the security level as something your retailer and insurer agree on first.
Wood, veneers and finishes
Frames and bases are usually made from MDF or plywood with a veneer, laminate or lacquer finish. Real wood veneer gives a warm, premium look in walnut, oak or ash. Lacquer allows exact brand colours, while laminate works well for high-traffic stores where cost and repeatability matter.
For a store chain, finish consistency across batches is as important as the finish itself. Approve a physical sample, record the reference and keep the sample for later reorders. Natural veneer varies from sheet to sheet, so tell the factory how much variation is acceptable.
How wholesale ordering is planned
A wholesale or multi-store order works best when the programme is defined in layers: standard dimensions, common components and a small number of variations per store.
- Brief and drawings: send the store layout, fixture list, target quantities and reference images.
- Shop drawings: the factory prepares drawings showing dimensions, glass, lighting positions, locks and cut-outs for your approval.
- Sample or prototype: a single approved counter and wall cabinet become the reference for all later units.
- Production: units are made in batches, with checks at board cutting, assembly, glazing and electrical fitting.
- Packing and shipping: each piece is packed and labelled by store and position.
- Installation: your shopfitting team or ours fits the units on site where installation is part of the agreement.
Prices and lead times depend on size, glass, lighting, locks, finishes and quantity, so we give them only after reviewing your drawings. Do not rely on a general per-piece figure when budgeting a chain roll-out.
Packing glass fixtures for export
Glass is the highest-risk part of any shipment. Panels may be packed separately from frames, with corner protection and rigid cartons or crates, and the whole load is secured in the container. Palletised timber packing for export should follow the phytosanitary rules of the destination country.
Discuss the shipping terms early, for example FOB, CIF or DAP, and decide who handles cargo insurance and unloading. If each store has its own delivery date, label cartons by location so the right pieces reach the right door.
A short specification checklist for shopfitters
| Item | What to confirm |
|---|---|
| Dimensions | Width, depth, height, counter working height, shelf spacing |
| Glass | Type, thickness, edge finish, low-iron or standard |
| Lighting | Colour temperature, CRI, driver position, plug type |
| Security | Lock type, master-key plan, glass fixing method |
| Finish | Veneer, laminate or lacquer, reference sample, tolerance |
| Logistics | Incoterm, packing format, delivery split by store |
Next step
If you are planning a boutique or jewellery store programme, send us your drawings, fixture list and target quantities. We will review the project and come back with material suggestions, a sample plan and shipping options for your markets.
Sıkça Sorulan Sorular
Can I order custom jewellery display cabinets in bulk from Palmiye?
Yes. We make display cabinets and counters to your drawings in our Istanbul factory and ship worldwide. Send your layout, dimensions, finishes and quantities, and we will review the project, propose a sample and give a quotation based on your specification.
Which glass is best for a jewellery showcase?
Tempered glass suits doors and shelves, while laminated glass is often chosen for counter tops and higher-security fronts. Low-iron glass gives a clearer, more neutral view of the stock. The right combination depends on span, stock value and your budget.
Can the cabinets include built-in LED lighting?
Yes. LED strips or spot modules can be integrated into the top, shelves or frame. Specify colour temperature, the plug standard of your country and where the driver should sit so it can be serviced without removing fixed glass.
How do I keep finishes consistent across several stores?
Approve a physical sample, record its reference and keep it for reorders. For natural veneer, agree how much variation between sheets is acceptable. Lacquer and laminate offer more repeatable results for large store programmes.
Can you use one master key across all cabinets?
A master-key plan is possible with suitable lock systems. Tell us how many units there are and who needs access, such as managers and sales staff, so we can specify compatible locks before production starts.
How are glass cabinets packed for export?
Glass is protected with corner guards and rigid packing, often separate from the frames, and loaded securely in the container. Packing is planned per project, including labelling by store, so the pieces arrive organised and ready to fit.
Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.





