Console Table Stock Sizes vs Made-to-Measure: When Adjusting by 50 mm Changes Cost and Lead Time
A 50 mm change can be free or can reset your tooling, depending on where it falls. This guide explains how board yield, set-ups and approvals link dimensions to cost and delivery for hotel projects.
A made to measure console table does not automatically cost more than a stock-size piece, and a 50 mm change does not automatically cost nothing. What matters is where that change falls relative to the board size, the machine set-up and the approval stage. This article explains how small dimension changes affect board yield, tooling and delivery, so you can decide when to stay with a standard size and when to ask for a custom one.
We build to project drawings in our Istanbul factory and ship worldwide, so the examples below come from the practical questions buyers ask when they send us a niche width or a corridor depth. Where figures depend on the project, we say so rather than quote a number that may not apply to you.
What stock size and made-to-measure really mean in a factory
In hospitality manufacturing, a stock size is a dimension the factory has already drawn, programmed and usually prototyped. Cutting files, drilling patterns, jigs and packing solutions exist. A made-to-measure piece starts from your dimensions, and the factory must confirm every one of those elements again.
The distinction is therefore less about craftsmanship and more about how much preparation is repeated. Think of it as a spectrum:
- Catalogue size: existing drawings, jigs and packing; the shortest preparation.
- Adjusted size: same design and construction, with length, depth or height changed within a safe range.
- Fully bespoke: new proportions, new joinery or a new top material; full drawing and sample cycle.
Most hotel buyers who ask for a made to measure console table actually need the middle option. That is good news, because adjusted sizes are usually far cheaper than a new design.
Why 50 mm matters: the board yield effect
Wooden console tops, side panels and drawer fronts are cut from standard sheets or from timber boards of limited width and length. The factory arranges parts on each sheet to waste as little as possible, a process called nesting. When a part grows by 50 mm, the layout changes, and sometimes the number of parts per sheet changes with it.
The effect is not linear. Consider the typical situations:
- Part still fits the same layout: yield is unchanged and the cost impact is close to zero.
- Part no longer fits beside its neighbour: one fewer part per sheet, so material use per table rises noticeably.
- Part now exceeds a board or sheet length: the top may need a joint or a different board size, which changes both cost and appearance.
This is why two requests that look nearly identical on paper can produce different quotations. A 1,200 mm (47.2 in) top and a 1,250 mm (49.2 in) top might sit on the same layout, while 1,250 mm and 1,300 mm might not. Only a nesting check against the actual board dimensions will tell you.
Solid timber behaves differently from panels
With solid wood, the limit is often the usable length and width of the boards after drying and trimming, not a fixed sheet size. Wider tops require more glued strips or longer clear boards, and grain matching adds selection time. For veneered panels, the base board dimensions are more predictable, but the veneer layout must still be planned so that joints fall in sensible places.
Tooling, jigs and set-ups
Many costs in custom size furniture are not in the material but in the preparation. CNC programs, drilling templates, edge-banding set-ups and assembly jigs are tied to specific dimensions. A small change may only need a program edit, while a larger one may require a new jig.
Items that commonly depend on dimension:
- CNC cutting and drilling files for panels and legs.
- Assembly jigs that hold the frame square during gluing.
- Shaped parts, such as curved aprons, that rely on moulds or templates.
- Fixed hardware positions, for example drawer runner locations and wall-fixing rails.
For a large batch, this preparation is spread across many units and becomes a small share of unit cost. For a run of ten pieces, the same preparation weighs much more. That is one reason adjusting furniture dimensions on a small order can feel disproportionately expensive.
Where the change falls: a practical comparison
The table below summarises how different adjustments usually behave. It is a general guide, not a price list; your result depends on the design, material and quantity.
| Adjustment | Board yield | Tooling | Lead time effect |
|---|---|---|---|
| Length +/- 50 mm, same construction | Often unchanged; depends on layout | Program edit | Small, mainly drawing re-approval |
| Depth +/- 50 mm | More sensitive, as depth often defines panel width | Program edit; jigs may need checking | Small to moderate |
| Height +/- 50 mm | Mostly leg and side panel length | Usually minor | Small |
| Change across a board or sheet limit | Can change noticeably | New layout; possible new jig | Moderate |
| New proportion or new joinery | New nesting | New jigs and sample | Longest; full sample cycle |
How dimension changes affect lead time
Lead time is influenced less by machine hours and more by the approval chain. A stock size can often go straight into production slots once finish and quantity are confirmed. A made-to-measure piece usually adds steps: updated shop drawings, your review, a sample if the dimension is critical, and then production.
Each step can be quick or slow depending on how fast decisions are made. The main factors are:
- How complete your brief is when you send it.
- Whether a sample or mock-up is required for the changed size.
- Material availability, especially for specific veneers or timber grades.
- The factory's production schedule at the time of order.
We do not quote fixed lead times without seeing the project, because they depend on the combination of these points. What we can say is that confirming dimensions early, before sample approval rather than after, is the single most effective way to protect your delivery date.
Shipping and packing: the overlooked 50 mm
Dimensions also affect logistics. A table that grows slightly may change carton size, pallet layout or the number of pieces per crate. In container loading, a small change can alter how efficiently pieces nest together, which affects freight cost per piece when shipping from Turkey to Europe, the Middle East, Central Asia, Africa or beyond.
If your project has tight container planning, share the target loading method (for example FOB or DAP, and full container or consolidated) when you discuss dimensions. We can then check whether a small change keeps packing efficient or pushes it over a threshold.
When stock sizes are the smarter choice
Made-to-measure is valuable, but it is not always necessary. A stock or adjusted-catalogue size is usually the better choice when:
- The space is flexible and a nearby standard dimension looks equally good.
- The order is small and preparation cost would be spread over few pieces.
- The opening date is close and there is no time for a sample cycle.
- You want repeat orders to match exactly in future batches.
Before committing to a custom width, measure the real constraint. If the console sits in an open lobby wall, 50 mm either way rarely changes how it looks. If it sits in a niche, between pillars or under a window, the exact dimension matters and made-to-measure is justified.
When made-to-measure is worth it
Choose a made to measure console table when the dimension solves a real problem. Typical cases include fitting a niche with a small clearance, aligning with a door, window or reception counter, keeping an accessible route clear, or matching an existing built-in unit. In these situations a stock size would leave an awkward gap or an obstruction, and the extra preparation is a sensible investment.
For multi-room hotels, consider standardising a few sizes instead of tailoring each table. Limiting the project to two or three dimensions often keeps the benefits of custom sizing while reducing preparation and simplifying spares and reorders.
How to brief a dimension change efficiently
A clear brief shortens the quotation process and reduces the risk of re-drawing later. When you ask for a changed size, include:
- The target dimensions in millimetres, with the tolerance you can accept.
- The reason for the change, such as a niche width or clearance requirement.
- The quantity, and whether all pieces share one size or several.
- The finish and top material, since these affect board layout.
- Your shipping terms and destination.
Also tell us if there is a flexible range. Saying that the width can be 1,150 to 1,250 mm (45.3 to 49.2 in) lets us select the size that uses boards most sensibly, which can help both cost and lead time without changing the look.
Conclusion
A 50 mm change is small to the eye but can be large to a factory, depending on board layout, tooling and packing. Sometimes it costs almost nothing; occasionally it crosses a limit that changes material use and adds an approval step. The way to find out is to share the dimensions and the flexibility you have, not to guess.
If you are planning a hotel, restaurant or residential project, send us your drawings or a niche schedule. We will check the nearest efficient size, explain what a custom dimension would change and suggest the most practical route for your quantity and destination.
Sıkça Sorulan Sorular
Does a 50 mm change always increase the price of a console table?
No. If the new dimension still fits the same board layout and existing set-ups, the cost impact can be very small. The price rises when the change reduces parts per sheet, crosses a board length limit or needs new jigs. A nesting check on your drawing shows which case applies.
How much longer does a made-to-measure console table take than a stock size?
It depends on the project. Custom sizes usually add drawing updates, your approval and sometimes a sample, while stock sizes can move to production faster. We do not quote fixed times without seeing quantity, material and finish, but early dimension confirmation helps protect your delivery date.
Can I order a console table in a size between two standard models?
Often yes, provided the construction stays the same. Adjusting length, depth or height within a safe range is usually simpler than creating a new design. Send your target dimension and any flexible range, and we will tell you whether it is a minor adjustment or a new specification.
Is it cheaper to order made-to-measure for large hotel batches?
Per-piece preparation costs, such as programming and jigs, are shared across more units, so custom sizing becomes less significant in larger batches. Material layout and finish still affect price. Standardising two or three sizes across the hotel often gives the best balance of fit and cost.
Do you ship made-to-measure console tables worldwide?
Yes. We produce to order in Istanbul and export to Europe, the Middle East, Central Asia, Africa and other regions. Dimensions influence carton size and container loading, so please share your destination and preferred terms, such as FOB or DAP, when you request a quotation.
Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.





