TV Units for Residential Developments: Supplying Apartment Blocks with Matching Media Furniture
Furnishing dozens or hundreds of apartments with one repeatable media unit takes more than a good design. This guide shows developers how to standardise, specify, produce and deliver a matching package.
If you are a developer furnishing a whole building, TV units for apartment developments work best when you treat them as one repeatable product rather than hundreds of separate pieces. A single design, a locked specification and a phased delivery plan keep the cost per unit predictable and the finished apartments consistent. This guide explains how that process works, from the first drawing to the last pallet, based on how we produce custom orders at our factory in Istanbul for clients worldwide.
Why a repeatable design matters for developers
In a residential block, buyers or tenants walk through several apartments and compare them. Matching media furniture in the same finish and proportion makes the whole building feel planned and well finished. It also simplifies purchasing, installation and later maintenance.
A repeatable design brings practical benefits for you as well:
- One set of shop drawings is approved once and reused for every apartment.
- Material is purchased in larger, consistent batches, which helps colour matching.
- Installation teams learn the routine quickly, so later floors go faster than the first.
- Spare parts and replacement panels are easier to manage after handover.
Build a developer furniture package around a few variants
Most buildings contain several apartment types, such as studio, one-bedroom and two-bedroom layouts. You rarely need a different unit for each. A sensible developer furniture package usually uses one design language in two or three sizes.
Start from the apartment schedule
Prepare a schedule listing each apartment type, the number of apartments, the wall available for the TV and the intended screen size. Add the position of sockets, data points and any structural obstacles. With this, we can propose which sizes can be shared and where a custom dimension is genuinely needed.
Keep variants modular
A modular approach lets one base cabinet serve several layouts. For example, the same console body can be paired with a narrower or wider back panel, or a shelf can be added in the larger apartments. This keeps tooling and production simple while still responding to different room sizes.
Decide what the residential media unit should do
A residential media unit in an apartment block has a different job from a hotel unit. Occupants live there long term, so storage and cable concealment matter more than in short stays. At the same time, you want a design that suits many tastes.
Points to settle early:
- Format: floor-standing console, wall-hung unit or full panel with a media wall backdrop.
- Storage: open shelf for a set-top box or sound bar, closed drawers for cables and remotes.
- Cable routing: concealed cut-outs and a clear service opening for future equipment.
- Ventilation: enough airflow around electronics if any compartment is closed.
- Screen size range: design the unit for the largest screen you expect, not only today's model.
Choose materials for a long, low-maintenance life
For bulk apartment furniture, the material choice sets both the unit price and the number of complaints after handover. Wood-based boards with a durable surface are the usual route.
| Option | Look | Typical consideration |
|---|---|---|
| Melamine or HPL on board | Wide range of wood and stone effects | Practical for large volumes and consistent colour |
| Wood veneer on MDF or plywood | Natural grain, warmer feel | Needs sheet selection and sealed finish for consistency |
| Lacquered MDF | Smooth, modern surface | Edges and corners need careful finishing and handling |
Whichever you choose, ask about edge banding, hardware and fire requirements in your country. Fire-retardant boards, where required, can affect cost and lead time, so confirm this before pricing is fixed.
Approve one sample before the full run
With many identical pieces, one mistake is repeated across the whole order. That is why a pre-production sample is worth the time. A single finished unit lets you check proportions, finish, drawer action, cable cut-outs and fit against a real TV.
If you cannot visit, we can share photos and video from the factory, and ship the sample if you prefer to inspect it in person. Once you approve it in writing, the sample becomes the reference for every unit that follows.
Plan colour and batch consistency
A building is often furnished over months, and finishes can drift between batches if materials are bought separately. To avoid this:
- Agree the finish reference by sample or code, and keep an approved sample on file.
- Place the full material order in as few batches as the schedule allows.
- For natural veneer, specify that sheets for each delivery are matched within a lot.
- If you may reorder later, ask the factory to record the finish details.
Think about pricing drivers, not only the unit price
We do not quote a fixed figure without drawings, because cost depends on the project. The main factors are:
- Overall size and number of drawers, doors and shelves.
- Surface material and edge treatment.
- Hardware level, such as soft-close systems or push latches.
- Any lighting, backing panels or integrated cable solutions.
- Order quantity, which spreads setup and programming time across more pieces.
- Packing method and shipping terms.
When you compare quotes from different suppliers, check that they describe the same board thickness, finish and hardware, otherwise the figures are not comparable.
Packing, shipping and phased delivery
Because we supply projects worldwide, packing is planned around the route. Units are protected with corner guards and wrapping, and loaded to limit movement in the container. We can discuss Incoterms such as EXW, FOB, CIF or DAP depending on how much of the logistics you want us to handle.
For a large block, we recommend delivering in phases that follow your construction programme. Label cartons by apartment type and floor so that installers do not waste time sorting. Keeping a small reserve of spare panels and fittings on site is also sensible for the handover period.
Installation and handover
Wall-hung units need the right fixings for concrete, brick or drywall, and tall pieces should be anchored for safety. Share the wall construction details early so we can supply suitable hardware and fixing instructions. Where needed, installation can be arranged as part of the project scope.
Before the first apartment is signed off, run a short checklist:
- Unit level, aligned and fixed to the wall.
- Doors and drawers close evenly without rubbing.
- Cable openings match the actual socket positions.
- Finish is free of chips and matches the approved sample.
Next step
If you are preparing a residential project, send us your apartment schedule, wall dimensions and any reference images. We will review them and suggest a repeatable design, material options and a delivery plan, then prepare a project quotation for your development.
Sıkça Sorulan Sorular
Can you make one TV unit design in several sizes for different apartment types?
Yes. Most developments use one design language in two or three sizes, built from shared base modules. This keeps production efficient while still fitting studio, one-bedroom and larger layouts. Send your apartment schedule and wall dimensions, and we will suggest which sizes can be shared.
Do I need to approve a sample before ordering for a whole building?
We strongly recommend it. One approved sample lets you check proportions, finish, hardware and cable cut-outs against a real TV before the full run. Once approved in writing, it becomes the reference for every unit produced.
How is the price of bulk apartment furniture decided?
Price depends on size, materials, hardware, any lighting or integrated features, order quantity and shipping terms. We prepare a quotation after reviewing your drawings or specification, so comparisons with other suppliers should use the same material and hardware details.
Can delivery be split to follow the construction schedule?
Yes. Phased deliveries can be planned around your building programme, with cartons labelled by apartment type and floor. The exact timing depends on quantities, materials and approvals, so we confirm a schedule once the specification is fixed.
Do you ship TV units to developments outside Turkey?
Yes, we supply custom orders worldwide from our Istanbul factory. We can discuss Incoterms such as EXW, FOB, CIF or DAP and plan packing for your route and destination port.
Can finishes match if I reorder later for another phase?
We record the approved finish details and keep reference samples to help matching. Natural materials such as veneer can vary slightly between lots, so ordering in as few batches as possible gives the most consistent result.
Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.





