Consoles and Dressers

Vitrine for Perfume Shop, Pharmacy and Cosmetic Counter: Custom Display Fixtures

A practical guide to specifying custom vitrines for perfume shops, pharmacies and cosmetic counters, covering lighting, glass, shelf heights, security and bulk export orders.

A well-specified vitrine for a perfume shop does three jobs at once: it protects delicate bottles, shows them in flattering light and keeps the glass looking clean under constant handling. Pharmacies and cosmetic counters share these needs but add their own, such as hygiene, regulated product zones and fast restocking. This guide explains how to brief a factory for these retail types, whether you need one counter or a programme for many stores.

Why these three retail types need different vitrines

A general display cabinet is designed to look good in a lobby or a showroom. A shop vitrine works harder: it is opened many times a day, cleaned constantly and judged against the product it holds. Small, high-value items sit at eye level, so every detail of the glass, lighting and shelf edge is visible.

  • Perfume shops: glass bottles in varied shapes, testers, gift sets and brand-led presentation.
  • Pharmacies: boxed products, dermocosmetic ranges, supplements and items that must stay behind a counter or lockable door.
  • Cosmetic counters: lipsticks, palettes, skincare jars and testers that customers touch and sample.

Because each type behaves differently, a custom shop vitrine usually works better than a catalogue piece. Shelf depths, door types and lighting can be matched to the actual product range.

Product height and shelf spacing

Start with the products, not the cabinet. Measure your tallest and smallest items, including gift boxes, and group them by height. A perfume range often mixes 50 ml (1.7 fl oz) bottles, 100 ml (3.4 fl oz) bottles and tall limited editions, so uniform shelf spacing wastes space or crowds the display.

Useful planning rules:

  • Leave clearance above each bottle so a hand can lift it without touching the shelf above, normally a few centimetres more than the product height.
  • Use adjustable shelf supports where ranges change often, and fixed shelves where the layout is permanent.
  • Keep premium or new products between roughly shoulder and eye level, where customers look first.
  • Place heavy gift sets and large bottles low, and small items higher, so the cabinet never looks top-heavy.
  • Use shallow depths for small items. Deep shelves hide products at the back and make cleaning harder.

For pharmacies, shelf depth is often set by the standard box sizes of the main brands. Send the factory a list of box dimensions and we can propose a layout that holds the range without wasted gaps.

Lighting that flatters glass and liquid

Perfume is sold partly on how it looks. Coloured liquid, cut glass and metallic caps respond strongly to the quality and direction of light, so lighting is part of the vitrine design rather than an afterthought.

Colour temperature and rendering

Warm to neutral white light tends to suit amber, gold and woody fragrance packaging, while cooler light can suit clinical pharmacy ranges and skincare. Whatever you choose, keep one colour temperature across the whole store so neighbouring cabinets look consistent. Ask for LED strips with good colour rendering, as poor rendering makes packaging colours look dull or inaccurate.

Light position

  • Top lighting gives general illumination but can create shadows under deep shelves.
  • Front-edge or side lighting reduces shadows and makes bottles glow.
  • Glass shelves with edge lighting spread light through the display, a popular choice for fragrance.

Heat and driver placement matter in a closed cabinet. Keep drivers accessible for service, and avoid fitting heat-producing parts close to products that are sensitive to temperature. Fragrance and many cosmetics should not sit in prolonged heat or direct sunlight, so position the vitrine away from windows where possible.

Glass choices and keeping it clean

In a retail setting, glass is the most visible surface and the one that shows every fingerprint. Specify it with maintenance in mind.

  • Clear glass gives the best view of the product. Low-iron glass reduces the green tint seen at the edges and suits white or pale packaging.
  • Tempered glass is the usual choice for doors and shelves because it is stronger than ordinary annealed glass and breaks into small pieces.
  • Laminated glass holds together if it breaks, which can be a sensible choice for busy public areas.
  • Mirrored back panels show the back of bottles and make shallow cabinets look deeper, though they show dust more clearly.

Think about how staff will clean. Sliding doors leave tracks that collect dust, while hinged doors give easier access to the glass surface. Polished glass edges and neat hardware reduce places where dust and residue can build up. Plan a simple cleaning routine with a non-abrasive glass cleaner, and avoid aggressive chemicals near wooden surfaces, edges and veneers.

Frame and finish: wood, veneer, laminate or lacquer

The cabinet body should support the product without competing with it. Neutral tones such as warm white, soft grey, light oak or walnut are common in beauty retail, but your brand identity decides the final choice.

FinishSuitsPoints to consider
Wood veneerBoutique perfumeries, premium countersNatural look; needs a protective lacquer and careful cleaning
Laminate (HPL or melamine)Pharmacies, multi-store programmesPractical, consistent colour, easy to wipe
LacquerBrand-led, high-end countersRefined look; matte or satin hides marks better than high gloss

For rollouts across several shops, consistency is the priority. Approve a finish sample before production so every unit matches the brand colour, and keep the approved sample for later reorders.

Security, doors and locks

Perfume and cosmetics are small and valuable, so theft control shapes the design. Lockable doors, cam locks or key systems can be fitted to cabinets that hold premium stock. If you run many stores, consider master-key planning so staff can open every unit with one key while customers cannot.

Pharmacies may need areas where selected products are kept out of customer reach. A vitrine with locked upper doors and open lower shelves can combine service access with self-selection. Always check local retail and pharmacy regulations for your country, as rules differ and we cannot advise on them for you.

Testers, sampling and customer handling

Counters that let customers try products need a clear separation between display stock and testers. A shallow open shelf or a drawer at working height keeps testers close and tidy. Add a small tray or rounded shelf front where bottles are lifted often, so edges do not chip or scratch.

Rounded corners and softly finished edges are kinder to both products and passers-by in busy aisles.

Ordering custom vitrines for several shops worldwide

We produce to your drawings in our Istanbul factory and supply customers in many regions. For chains, distributors and fit-out contractors, the process is usually the same.

  1. Brief: send floor plans or elevations, product dimensions, finish references and photos of similar displays.
  2. Shop drawings: we prepare drawings for your approval, including shelf positions, lighting and lock details.
  3. Sample: a sample vitrine lets you check proportions, glass and light before a larger order.
  4. Production: units are made in batches, with finish and glass kept consistent between cabinets.
  5. Packing and shipping: glass requires protective packing, and you can choose terms such as FOB or DAP depending on the project.
  6. Installation: where needed, on-site fitting can be discussed for your location.

Lead time and cost depend on the quantity, glass type, lighting package, finish and destination, so we quote each project individually rather than from a fixed list.

Checklist before you request a quotation

  • Product types, tallest item height and box sizes
  • Number of shops and units per shop
  • Preferred glass type and door style
  • Lighting requirements and power supply in each store
  • Finish, colour references and any logo or branding
  • Security and locking needs
  • Destination country and preferred shipping terms

Next step

If you are planning a vitrine for a perfume shop, pharmacy or cosmetic counter, send us your drawings, product list or even reference photos. We will review the details and return with material suggestions, an estimated lead time and shipping options for your project.

Sıkça Sorulan Sorular

Can you make a custom vitrine for a single perfume shop?

Yes. We produce to project drawings, so a single counter or a full multi-store programme can be quoted. Send your dimensions, product sizes and finish references, and we will propose a layout. Quantity affects the unit cost and lead time, but custom design is not limited to large orders.

What glass is best for a perfume display cabinet?

Tempered clear glass is the usual choice for doors and shelves because of its strength. Low-iron glass gives a cleaner view of pale packaging. For busy public areas, laminated glass can add safety. The right option depends on your location, budget and display style.

What lighting should I use in a cosmetic display cabinet?

LED lighting with good colour rendering is the common choice. Keep one colour temperature across the shop, and use front or edge lighting to reduce shadows. Keep drivers accessible and avoid placing products near heat sources or direct sunlight.

Do you ship pharmacy display furniture overseas?

Yes, we export from Istanbul to many regions. Glass components are packed with protective materials, and we can discuss terms such as FOB or DAP. Delivery time depends on the order size, destination and production schedule, so we confirm it per project.

How do I order the same vitrine for many stores?

Approve a sample or drawing first, then place the batch order. We keep the finish, glass and hardware consistent across units. For later reorders, keep the approved sample details and finish reference so new cabinets match the earlier batch.

Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.

Related products

All Console Table Models

Get a quote for Console Table Models

Share dimensions and quantities; we will prepare a quote for your project.