Consoles and Dressers

Console Table Hidden Costs: What the Unit Price Does Not Show

Two ex-works quotes for the same console table can differ in what they include. This guide lists the secondary line items that distort comparisons, so you can compare offers on equal terms.

Console table hidden costs are the line items that sit outside the unit price: tooling, samples, packing, testing, documents and handling. When you compare two ex-works (EXW) quotations, the lower figure is not always the lower project cost. This article shows you which items to look for and how to put quotes on an equal footing.

We build made-to-order furniture in our Istanbul factory and ship worldwide, so we see how differently suppliers present their offers. The points below are practical checks, not a claim that every project carries every cost.

Why the unit price is only part of the picture

A unit price usually covers materials, labour and finish for one piece. It often does not state what is excluded. One supplier may include export packing and a sample credit, while another lists them separately or not at all.

The result is a comparison of unlike things. Before you rank quotes, convert each one into a full landed list of items, even if some values are still estimates.

Tooling and set-up costs

Custom pieces sometimes need one-off preparation before production starts. Whether this is charged separately depends on the design and the factory.

  • Templates and jigs: curved tops, demilune shapes or repeated routed profiles may need cutting templates.
  • CNC programming: fluted, carved or shaped parts need machine programs prepared from your drawing.
  • Moulds and press forms: bent or laminated curves can require a form.
  • Special cutters: an unusual edge profile may need a custom knife.

Ask whether tooling is charged once, spread across the unit price, or credited against the order. Also ask who owns the tooling and whether it can be reused for a reorder.

Sample and prototype fees

A sample fee for furniture is normal for custom work, because the factory builds a piece that will not be part of the standard run. The question is what the fee covers and what happens to it afterwards.

Clarify these points:

  1. Is the sample charged at full cost, at a reduced cost or at cost of materials?
  2. Is the fee credited against the production order if you confirm it?
  3. Does it include the finish you will actually use, or only a plain version?
  4. Who pays for sample shipping, and by which method?
  5. How many revision rounds are included before extra charges apply?

A sample that skips the final finish saves money but tells you less. If colour matters across a large batch, approving a finished sample is usually the better investment.

Drawing and engineering time

If you supply only a photo or a mood board, the factory has to produce shop drawings before it can quote precisely. Some suppliers absorb this; others charge for it. Where a supplier includes design support, ask for the scope: dimensions, joinery details, hardware positions and finish notes.

Crating cost for export

Crating cost for export is one of the most common gaps between quotes. Standard carton packing and a reinforced wooden crate are very different things, and so is their price.

Items to confirm:

  • Packing method: cartons with corner protection, foam wrap, wooden crate or pallet frame.
  • Protection of stone or glass tops: these usually need separate padded packing.
  • Fumigation and treatment: wooden packing material for some destinations needs treatment and marking to meet import rules. Check the requirements of your country.
  • Labelling: room numbers, item codes and handling marks help site teams, and may be charged or included.

Crates also change volume. Heavier packing takes more space in a container, which can raise freight per piece even when the EXW price looks low.

Inspection, testing and documents

Some buyers need extra paperwork. Depending on the project, this may include a packing list with photos, timber origin declarations, finish or adhesive data, or third-party inspection before shipment.

Ask whether standard documents are included and which ones carry a fee. Third-party inspection, if required, is usually arranged and paid separately.

Handling, loading and local charges

EXW means you take responsibility from the factory gate. Loading onto the truck, export clearance and inland transport are therefore not automatically part of the price. Compare quotes on the same Incoterm where you can, for example FOB or DAP, or ask each supplier to add the missing steps so the totals match.

Line itemQuestion to askWhy it matters
ToolingOne-off, amortised or none?Affects small runs most
SampleCredited to the order?Changes effective cost
PackingCarton or crate?Affects damage risk and freight volume
DocumentsWhich are standard?Avoids late fees
LoadingIncluded in EXW?Changes the start point of your costs

Cost items that depend on quantity

Set-up costs weigh heavily on a small order and lightly on a large one. Ten pieces carry the same tooling as two hundred, so the per-piece effect differs. When you compare quotes, state your quantity clearly and ask each supplier to price against it. Exact figures depend on the design, materials and volume, so treat any early number as an estimate until drawings are approved.

Validity and material price changes

A quote may also hide conditions. Check how long the price is valid, whether timber and finish costs can be adjusted, and whether a design change after sample approval is charged. These clauses do not appear in the unit price but can alter the final invoice.

A simple method for comparing quotes

  1. List every item in a table: unit price, tooling, sample, drawings, packing, documents, loading.
  2. Mark each cell as included, excluded or unclear.
  3. Ask suppliers to fill the unclear cells in writing.
  4. Align the Incoterm so every quote starts and ends at the same point.
  5. Compare the total for your actual quantity, not the unit price alone.

Conclusion

Console table hidden costs are rarely a sign of bad faith. More often they come from quotes written to different scopes. A clear checklist and written answers turn a confusing comparison into a fair one.

If you are pricing a project, send us your drawings, photos or room schedule with the quantity and destination. We will return a quotation that lists these items separately, so you can see exactly what is included.

Sıkça Sorulan Sorular

What are the most common hidden costs when buying custom console tables?

The most common are tooling or set-up charges, sample fees, drawing time, export packing, treatment and labelling of wooden crates, documents, and loading under EXW terms. Each can be included, charged separately or left out, so ask for a written breakdown.

Is a sample fee for furniture usually refundable?

It depends on the supplier. Many factories credit the sample fee against the production order once you confirm it, while others keep it as a separate charge. Agree the policy in writing before you request the sample.

Why does crating change the cost so much?

A reinforced wooden crate uses more material and labour than cartons, and it takes more container space. It also lowers damage risk, especially for stone or glass tops. Compare the packing method before comparing prices.

Does an EXW price include shipping?

No. EXW means the price covers the goods at the factory, and you arrange loading, export clearance and freight. If you want comparable quotes, ask suppliers to price on the same term, such as FOB or DAP.

How can I avoid surprises when comparing quotes from different countries?

Use one table for all suppliers, list every secondary item, align the Incoterm and price for the same quantity. Ask suppliers to confirm unclear items in writing before you compare the totals.

Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.

Related products

All Console Table Models

Get a quote for Console Table Models

Share dimensions and quantities; we will prepare a quote for your project.