Console Table In-House Production: What a Factory Makes Itself and What It Outsources
Most custom console tables combine wood, stone, metal and hardware, and rarely does one workshop make every part. This guide shows which components are typically produced in-house, which are outsourced, and how to ask transparent questions.
When you order a custom wooden console table for a hotel, you are often buying more than wood. Stone tops, brass or steel parts, glass, hardware and sometimes upholstery or lighting may all be part of the piece. Understanding console table in-house production, and where a factory relies on partners, helps you judge capacity, quality control and lead time before you commit to an order.
Subcontracting is not a warning sign in itself. Most furniture factories outsource some processes, and many do it for good reasons. What matters is that the arrangement is open, controlled and clearly reflected in the quotation and schedule.
Why the in-house question matters to buyers
The answer affects three things you care about: consistency, schedule and accountability. A part made in the factory follows one production plan and one quality check. A part made elsewhere adds a hand-over, a transport step and another timetable.
- Consistency: colour, dimensions and finish are easier to hold across a batch when fewer parties are involved.
- Lead time: outsourced items can delay the whole assembly if the supplier is late.
- Accountability: you need one contact who answers for the finished table, whoever made each part.
What is typically produced in-house
A furniture factory with its own woodworking line normally keeps the core of the table under its own roof. For a wooden console, this usually includes the processes that define the look and structure of the piece.
- Timber preparation: cutting, planing and sizing solid wood.
- Veneer pressing and panel construction on engineered cores.
- CNC routing, shaping and edge profiling.
- Joinery and assembly of frames, legs and drawers.
- Sanding, staining and lacquer or oil finishing.
- Final quality inspection and packing.
In our own factory in Istanbul, Turkey, we produce console tables to the project drawings you send. Exact capabilities differ from factory to factory, so treat this list as a reference point for your questions rather than a universal rule.
What is commonly outsourced
Some components need specialist machinery, materials or trades that a woodworking factory may not run itself. These are the items most often supplied by partners.
Stone, marble and glass tops
Cutting, polishing and edge-profiling natural stone requires dedicated equipment. A stone top supplier usually cuts the slab to the template supplied by the furniture maker, and the top is then fitted to the wooden base. Glass tops, especially tempered or bevelled glass, are likewise cut and treated by specialist processors.
Metal parts
Brass trims, black steel legs or frames and decorative metal inlays are often made by a metal parts supplier, then finished in the required plating, powder coat or patina. Some factories have their own metal workshop; many do not. Ask which finishing steps happen where, since metal finish and wood finish need to be coordinated.
Hardware and fittings
Hinges, runners, locks, handles and levelling feet are normally purchased from component manufacturers. This is standard practice and not a quality concern, provided the brand or grade is specified and approved.
Other specialist items
- Mirrors and silvered glass.
- Integrated lighting or charging modules.
- Leather, upholstery or woven inserts such as cane.
- Carved or marquetry details, depending on the workshop.
Questions to ask a factory
Transparent questions get transparent answers. You do not need to audit the supplier; you simply need a clear picture of how your order will be made.
- Which parts of my console table will you produce in your own workshop?
- Which parts will be supplied by outside partners, and how long have you worked with them?
- Who checks the outsourced components before they enter assembly?
- Will the sample I approve be made with the same suppliers as the production batch?
- If a subcontractor is late or a part fails inspection, how is the schedule protected?
- Can you share progress photos of both in-house and outsourced stages?
A factory that answers these calmly and specifically is usually well organised. Vague answers, or reluctance to say who makes what, are a reason to ask more questions.
How outsourcing affects lead time and cost
Lead time depends on the project, the materials and the approval process, so we cannot give a single figure. What we can say is that outsourced parts add dependencies. A stone top must be cut after the template is confirmed, and a metal base needs time for fabrication and finishing before assembly.
On cost, the main drivers are the material grade, the complexity of the part and the order quantity. A hybrid console with a stone top and metal base involves several suppliers, so the quotation should show how each element is accounted for, even if the unit price is presented as a single figure.
Keeping control when parts come from several sources
Good coordination is what makes a mixed-material table work. A few practices help you stay in control, whichever factory you choose.
- Single set of shop drawings: all parts, including stone and metal, should be dimensioned on drawings you have approved.
- Approved sample or mock-up: check how wood, stone and metal look together, not separately.
- Finish references: agree colour and gloss for each material and confirm how they are matched under the same light.
- Batch consistency: for larger orders, ask how stone and metal parts will be sourced from the same lot or supplier throughout.
- Inspection before packing: request photos of the assembled table before it is crated for export.
Worldwide orders and made-to-order production
Because custom console tables are made to order, nothing is built from generic stock. That gives you room to specify the materials and, within reason, the supply chain. If you are ordering for projects in Europe, the Middle East, Central Asia, Africa or beyond, the same principle applies: know who makes each part, and confirm that the packing and shipping plan protects stone, glass and finished wood in transit.
If a particular supplier is important to you, for example a specific stone quarry or a metal finish from a named source, say so in your brief. Where it is practical, the factory can build this into the production plan.
Conclusion
A factory that produces the wooden structure, finishing and assembly in-house and partners with trusted specialists for stone, metal and hardware can deliver a well-controlled result. Your task as a buyer is to ask clearly, get the answers in writing and make sure the schedule and inspection steps cover every component.
If you are planning a console table order, send us your drawings or reference images. We will explain which parts we make in-house, which come from partners, and what that means for your timeline and quotation.
Sıkça Sorulan Sorular
Is it a problem if a furniture factory outsources some console table parts?
No. Most factories outsource specialist items such as stone tops, metal parts, glass and hardware. What matters is transparency, clear drawings, approved samples and a quality check before assembly. Ask the factory to explain who makes what and how outsourced parts are inspected.
Which console table components are usually made in-house?
Typically the woodworking core: timber preparation, veneer pressing, CNC shaping, joinery, assembly, sanding, finishing and final inspection. The exact scope varies by factory, so ask for a clear list for your specific design and materials.
Who usually makes stone tops for wooden console tables?
A specialist stone top supplier normally cuts and polishes the slab to a template provided by the furniture maker. The finished top is then fitted to the wooden base. Ask how the template is checked and how the top is protected during packing.
Does outsourcing affect lead time?
It can, because outsourced parts add dependencies such as templates, fabrication and finishing before assembly. Actual timing depends on the project, materials and approvals. Ask the factory how it schedules supplier work alongside its own production.
How can I check that outsourced parts match the approved sample?
Confirm that the sample is made with the same suppliers and materials as production. Agree finish references in writing, and ask for photos of components and the assembled table before packing and shipment.
Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.





