Consoles and Dressers

Custom TV Unit with Storage for Board Games, Books and Media: Planning Compartments by Use

Good TV unit storage planning starts with a list of what will be stored, not with a sketch of the cabinet. This guide shows how to turn board games, books and media equipment into compartment sizes, drawer types and door choices for a custom order.

Effective TV unit storage planning starts with the contents, not the cabinet. If you list what the owner or guest will actually store, measure the largest items, and group them by how often they are used, the compartment layout almost designs itself. This guide works backwards from board games, books and media devices to sizes, drawers, shelves and door types, so that your custom order is clear to a factory from the first drawing.

It is written for designers, developers, retailers and importers who order custom or bulk media furniture for projects in different countries. The same logic applies to a single villa and to a run of identical apartment units.

Step 1: Build an inventory of what must be stored

Before choosing a layout, write down every item category and its quantity. Vague briefs such as "some storage" lead to compartments that are either too tight or wasted. A simple inventory takes ten minutes and prevents most redesigns.

  • Board games and puzzles: number of boxes, largest box size, and whether they are stacked or stood upright.
  • Books and magazines: approximate number, tallest book, and whether large-format books are included.
  • Media equipment: set-top box, router, sound bar, game console, streaming stick, and their power supplies.
  • Discs, remotes and accessories: controllers, headsets, chargers, cables.
  • Decorative items: frames, plants, lamps or collectibles that need display space rather than hidden storage.

For hospitality or residential programmes, ask the client for a typical user profile. A family villa needs very different compartments from a business apartment where guests only need a remote and a charger tray.

Step 2: Measure the largest item in each group

Compartments should be sized around the largest item in the group, plus working clearance, not around the average. Measure real objects, not catalogue figures, because board game boxes in particular vary widely between publishers.

As a general rule, allow about 10 to 20 mm (0.4 to 0.8 in) of clearance on width and height so items can be removed without scraping. Remember to subtract the thickness of the panels from the external dimensions: a cabinet with 18 mm (0.7 in) boards loses 36 mm (1.4 in) of width to the two side panels before any dividers are added.

Step 3: Match each item type to a compartment

Board games and puzzles

Board game boxes are heavy for their size and are often stored flat in stacks. A compartment about 35 to 45 cm (14 to 18 in) wide covers many standard boxes, but you should check the specific titles. If the stack is more than four or five boxes high, a drawer or a door cabinet with an adjustable shelf is easier to use than an open niche.

Deep drawers on full-extension runners suit games well, because the user sees the whole stack from above. Make sure the runners have an adequate load rating for the total weight of the boxes, and state the expected load on the drawing.

Books and magazines

Standard hardbacks need a shelf height of roughly 25 to 30 cm (10 to 12 in), while large-format art or cookery books may need 35 cm (14 in) or more. Mixing both on one fixed shelf wastes space, so use two heights or adjustable shelf pins.

Shelf span matters as much as height. Books are dense, and a long shelf with no support will sag over time. Use a vertical divider or a thicker board where the span is long, and discuss the load with your manufacturer.

Media equipment

Devices need a different kind of compartment. They need ventilation, cable access and a position that does not block the remote signal. A closed compartment with no airflow is a common cause of overheating, so ask for ventilation slots or an open back in the equipment bay.

Give equipment its own zone, ideally below or beside the screen, and keep it separate from paper-based storage. Planning power outlets and cable routes at this stage is far easier than adding them later.

Discs, controllers and small accessories

Small items disappear in large compartments. Shallow drawers with dividers, or a shallow tray inside a door cabinet, keep remotes, chargers and controllers visible and organised. A drawer height of 10 to 15 cm (4 to 6 in) is usually enough.

Step 4: Choose open, closed or glazed storage

Once the items are grouped, decide which should be visible. The choice affects appearance, dust, and daily convenience.

Storage typeBest forPoints to consider
Open shelf or nicheDecorative objects, frequently used booksCollects dust; contents need to look tidy
Hinged door cabinetBoard games, mixed items, adjustable shelvesNeeds door swing clearance in front
Sliding doorNarrow rooms, wide openingsOnly part of the opening is accessible at once
DrawerStacked games, accessories, discsRunner quality and load rating are important
Glass doorCollectibles, display booksVisible dust; glass type and edge finish need specifying
Push-to-open or handleless frontClean, modern lookHardware must suit frequent use

Step 5: Combine drawers and shelves in a balanced layout

A TV unit with drawers and shelves works best when the heavy, frequently used items sit low and the lighter or decorative items sit higher. Drawers are normally placed in the lower or central zone, where the user can see inside. Shelves above eye level should hold light objects only.

A practical approach to compartment layout design is to divide the width into zones:

  1. Centre zone: the screen position and equipment bay, planned around the screen size and viewing height.
  2. One side zone: closed storage with doors or drawers for games and accessories.
  3. Other side zone: open or adjustable shelving for books and display items.

Symmetry looks tidy, but function should lead. If the room only needs one side for books, do not duplicate it for appearance alone.

Step 6: Check dimensions that are easy to overlook

  • Depth: a screen bay and a book shelf rarely need the same depth. Stepped depths can save floor space.
  • Door swing and drawer pull-out: confirm there is room in front, especially in compact living rooms.
  • Weight on the wall or floor: a fully loaded unit is much heavier than an empty one, which matters for wall-hung designs and for tall furniture that needs anchoring.
  • Back panel: specify cut-outs for cables and any ventilation openings.
  • Material: MDF, plywood or veneered boards behave differently under load; choose according to the weight and finish.

Planning for hospitality and bulk orders

In a hotel suite, a serviced apartment or a residential development, the inventory is standardised. Guests usually need less storage than a family home, but the items must be easy to find, durable and simple to clean. A compact compartment for games and books, a lockable or concealed bay for equipment, and a drawer for remotes and chargers is often enough.

For large orders, fix the layout early and keep variations to a minimum. A standard cabinet with a small number of finish options is easier to produce consistently and to ship than many different configurations. Approve a sample first, then confirm quantities, finishes and packing method before production begins.

What to send your manufacturer

A clear brief shortens the quotation process. Prepare the following:

  • Room dimensions and the wall where the unit will stand.
  • Screen size and mounting method.
  • Your item inventory, with the largest dimensions in each group.
  • Preferred door and drawer types, finish and material.
  • Quantity, destination country and preferred shipping terms such as FOB or DAP.

Conclusion

Storage that works is planned from the contents outward. List what needs to be stored, measure the largest items, group them by use, and then pick drawers, shelves and doors to match. If you are preparing a custom or bulk order, send us your drawings, photos or item list, and we will review the layout and come back with a proposal and a quotation for your project.

Sıkça Sorulan Sorular

How do I decide between drawers and shelves in a TV unit?

Use drawers for heavy, stacked or small items such as board games, accessories and discs, because you can see everything from above. Use shelves for books and display pieces that you reach for often. Placing drawers low and shelves higher usually gives the most practical layout.

What shelf height is needed for books?

Standard hardbacks generally fit on a shelf about 25 to 30 cm (10 to 12 in) high, while large-format books may need 35 cm (14 in) or more. Adjustable shelves are the safest option when you do not know the exact collection, and long spans should be supported.

Can media equipment be stored behind closed doors?

Yes, but the compartment needs ventilation and cable access, and the door material must not block remote signals if devices rely on them. Ventilation slots, an open back or a perforated panel help prevent heat build-up. Always plan power outlets before production.

Can you make custom compartment sizes for bulk orders?

Yes. We produce to project drawings, so compartment sizes, drawer types and door styles can be adapted. For larger quantities, we recommend fixing one standard layout and approving a sample before production to keep every unit consistent.

What information should I send to get a quotation?

Send the room or wall dimensions, screen size, a list of items to be stored, preferred materials and finishes, quantity and destination. Drawings or reference photos are very helpful. With these details we can review the design and provide a quotation.

Every hotel project is different. Send us your drawings or room schedule for a tailored proposal on materials, lead time and shipping.

Related products

All Console Table Models

Get a quote for Console Table Models

Share dimensions and quantities; we will prepare a quote for your project.